PIPE, SUPPLY, R. H. 0960595 - Caterpillar

Illustration 1 g00694582
Pump compartment (1) Pressure Tap (Power Shift Pressure) (2) Pressure Tap (Upper Pump Delivery Pressure) (3) Pressure Tap (Lower Pump Delivery Pressure)
Connect a 6000 kPa (870 psi) pressure gauge to pressure tap (1) .
Connect a 60000 kPa (8700 psi) pressure gauge to pressure tap (2). Use this pressure gauge to monitor the crossover relief valve pressure setting of the right travel motor.
Connect a 60000 kPa (8700 psi) pressure gauge to pressure tap (3). Use this pressure gauge to monitor the crossover relief valve pressure setting of the left travel motor.
Illustration 2 g00306023
Sprocket (Left Track) (12) Sprocket (13) Stopper
Place stopper (13) in sprocket (12) in order to block forward left travel. Refer to Illustration 2.Diameter of stopper ... 75 to 80 mm (3.00 to 3.20 inch)
Start the engine.
Illustration 3 g00695083
Operator Monitor Panel (right console) (A) Controller Display (B) Switch For Boom Priority Mode (C) Switch For Swing Priority Mode (D) Switch For Fine Control Mode (E) Switch For User Mode (F) Power Mode Switch (G) Travel Alarm Cancel Switch
Start Service Mode and maintain power shift pressure at 2950 kPa (430 psi).
Depress the following three switches on the operator monitor panel at the same time: switch for fine control (D), switch for user mode (E) and travel alarm cancel switch (G). Hold all three switches down for at least three seconds.
The controller display (A) will be "00 00 00".
Input the service code "0E 32 3A". To increase the flashing character, push the switch for boom priority mode (B). To decrease the flashing character, push the switch