PIPE-CYLINDER HEAD 1004852 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1862 Pliers 1
B 1P-1864 Retaining Ring Pliers As 1
E 1P-1863 Retaining Ring Pliers 1
Illustration 1 g01196381
Lower the temperature of bearing assembly (9) and install bearing assembly (9).
Illustration 2 g01196384
Raise the temperature of bearing (8) and install bearing (8) onto shaft (6). Use Tooling (E) in order to install retaining ring (7).
Illustration 3 g01196385
Raise the temperature of gear (1) and install gear (1).
Illustration 4 g01196386
Use Tooling (B) in order to install retaining ring (5).
Raise the temperature of race (4) and install race (4).
Illustration 5 g01195987
Use Tooling (A) in order to position retaining ring (3) onto gear assembly (1). Install gear assembly (1) into plate assembly (2). Use Tooling (A) in order to install retaining ring (3). End By:
Install the pump drive. Refer to Disassembly and Assembly, "Pump Drive - Install".