PIPE AS 1710476 - Caterpillar

Illustration 1. The Gasket Kit Usage Information fiche.2. B/M (Bill of Materials) Gasket Kits - four fiche. The gasket kits are listed in part number sequence listing the contents of each kit. (See Illustration 2.)
Illustration 2. Bill of Material Gasket Kit fiche.The gasket kit usage information fiche classify the kits by engine location: 1) Upper structure, 2) Upper, central and lower and front structures, 3) Rear structure and water pump, and 4) Engine and transmission oil cooler, brake oil cooler, engine oil lines, fuel system, air compressor, fan drive and front/rear take-off within these classifications. Gasket kit part numbers are listed on the microfiche according to machine model, machine serial number, engine arrangement number and engine serial number. The machines are listed in ascending order by machine size -- that is, D3 through D10 Tractors, then No. 12 through No. 140 Motor Graders through the complete product line.
You must know the machine model, machine serial number, engine arrangement number and engine serial number to obtain the number of the needed gasket kit. Locate the machine model on the microfiche. Next, match the machine serial number with the corresponding engine arrangement and serial numbers. See Illustration 3. Find the correct classification, and then check the B/M Gasket Kit fiche to determine the exact contents of each kit. See Illustration 4.
The following list shows where the kits are used in the engine, kits currently available, and what each kit contains.
Upper Structure
1. CYLINDER HEAD KIT - gaskets, O-rings, seals and locks required to assemble an engine from the top of the cylinder block up. Kit does not include gaskets for installation or repair of attached components or any precombustion chamber gaskets or shims.2. WATER COOLED MANIFOLD AND DRY MANIFOLD GASKET KITS - gaskets and seals for manifold engines.If enough parts are needed a separate kit will be made for engine manifolds and the kit part numbers will appear in the manifold columns. If not, the necessary gaskets and seals will be included in the complete cylinder head kit.
Upper, Central And Lower, And Front Structures
1. AFTERCOOLER AND LINES GASKET KIT - gaskets and seals needed to fit the aftercooler. Kit also has gaskets and seals needed for the attaching lines.2. CYLINDER BLOCK/OIL PAN GASKET KIT - gaskets, O-rings, seals and locks needed to assemble an engine from the top deck of the cylinder block down. Gaskets needed for repair and installation of the oil pump are included. Oil pan and side cover gaskets are a part of this kit. An oil filter will be in this kit if it is offered. If an oil cooler and lines gasket kit is available, the oil filter will be found in it instead.3. CYLINDER LINER SEAL KIT - bands and seals to replace one cylinder liner.4. FRONT COVER AND HOUSING GASKET KIT - gaskets, O-rings, seals and locks to assemble the front cover and mount to the front face of the cylinder block. The kit contains fan drive seals when they are built into the