PIPE 1N3269 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 263 -
Personal injury or death may result from failure to adhere to the following procedures.Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system.Turn the disconnect switch OFF or disconnect the battery when changing fuel filters.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06185791
Remove bolts (1) and open grill assembly (2).
Illustration 2 g06185794
Disconnect tube assemblies (5).
Remove bolts (3) and clips (4). Reposition tube assemblies (5).
Illustration 3 g06185797
Remove bolts (6) and fuel cooler (7).Installation Procedure
Install fuel cooler (7) in the reverse order of removal.
Apply Tooling (A) to the threads of bolts (6). Tighten bolts (6) to a torque of 13.5 1.5 N m (119 13 lb in).