PIPE 2525802 - Caterpillar

Apron movement could cause serious injury or death. Read the Operation and Maintenance Manual for the proper procedure to engage the apron pin.
Refer to Operation and Maintenance Manual, "Blocking the Bowl and Apron" for more information.Crushing Hazard (7)This safety message is positioned on each side of the hitch link.
Illustration 8 g01379133
Hitch and steering movement can reduce clearances suddenly and cause personal injury...Stop engine before servicing.
No Clearance (8)This safety message is positioned on each side of the machine.
Illustration 9 g01371644
Stay back a safe distance. No clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur.
Do Not Weld On The ROPS/FOPS Structure (9)This safety message is positioned outside of the cab to the left of the rear window.
Illustration 10 g01226901
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification film. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification film.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.Improper Connections For Jump Start Cables (10)This safety message is positioned inside the battery compartment.
Illustration 11 g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for more information.Crushing Hazard (11)This safety message is located inside the cab near the transmission control.
Illustration 12 g01953898
There is restricted visibility to the area directly behind the machine. Failure to make sure the area is clear could result in injury or death. Use a second person on the ground to make sure that the area is clear before you operate the machine in the REVERSE position. Refer to the Operation and Maintenance Manual, "Operation Information" for more information.
Refer to Operation and Maintenance Manual, "Restricted Visibility" for more information.Do Not Step (12)This safety message is located on the front and the rear of the machine.
Illustration 13 g03466598
Do not use this surface as a step or platform. This surface may not support additional weight or may be slippery. Serious injury or death could occur from a fall.