parts catalog

PIPE 3236474 - Caterpillar

3236474 PIPE Caterpillar parts PIPE
Alternative (cross code) number:
Caterpillar 3236474 PIPE

Buy PIPE 3236474 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Removal Procedure
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes.
Illustration 1 g06084455
Illustration 2 g06084464
Open the right side access door. Turn the battery disconnect switch to the OFF position.
Open engine access panel (1). Disconnect wire assembly (3) from electric starting motor (2).
Illustration 3 g06084470
Illustration 4 g06084479
Disconnect cable assemblies (4) and (5) from the electric starting motor.
Remove nuts (7) and ground strap (6) from the electric starting motor. Remove the electric starting motor.Installation Procedure
Install electric starting motor (2) in the reverse order of removal.
Install nuts (7). Tighten the nut to a torque of 12 1 N m (106 9 lb in).
Connect cable assemblies (4) and (5) to the electric starting motor. Install the nut. Tighten the nut to a torque of 8.5 1.5 N m (75 13 lb in).

Parts pipe Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.