PIPE-EXHAUST 3426435 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-7527     Ram     1    
1U-5230 Hand Hydraulic Pump     1    Start By:
Remove the engine bottom guard. Refer to Disassembly and Assembly, " Bottom Guard (Engine)- Remove ".Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01252813
Remove bolts (1). Remove sheet (2) .
Remove bolts (3). Remove sheet (4) .
Open the hood. Open the engine access doors.
Illustration 2 g01252814
Remove bolts (5). Remove washers (6). Remove engine rear mount (7) .
Illustration 3 g01252817
Remove bolts (8). Remove washers (9). Remove engine rear mount (10) .
Illustration 4 g01252819
Position Tooling (A) between the frame and the flywheel housing. Raise the engine and remove engine rear mount (11) .
Illustration 5 g01252820
Attach Tooling (A) between the frame and the flywheel housing. Raise the engine and remove engine rear mount (12) .