PIPE ASSEM. 4S8474 - Caterpillar

Do Not Operate (5)This warning is located on each side of the engine on top of the first engine valve cover from the rear.
Illustration 6 g01172052
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
No Clearance (6)This warning is located near the articulated hitch on both sides of the machine.
Illustration 7 g01371644
Crushing Hazard! Stay back a safe distance. There is no clearance for a person in this area when the machine turns. Failure to follow these instructions could cause serious injury or death.
Crushing Hazard(7)This warning is located on the left side of the machine near the steering frame lock.
Illustration 8 g01081910
Crushing Hazard. There is no clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur. Connect the steering frame lock between front and rear frames before lifting, transporting, or servicing the machine in the articulation area.Disconnect the steering lock and secure before resuming operation.
Seat Belt (8)This warning label is found in the cab on the right armrest.
Illustration 9 g01371636
A seat belt should be worn at all times during machine operation to prevent serious injury or death in the event of an accident or machine overturn. Failure to wear a seat belt during machine operation may result in serious injury or death.
Product Link (9)This warning label is located in the cab.
Illustration 10 g01370917
This machine is equipped with a Caterpillar Product Link communication device. When electric/electronic detonators are used, this communication device should be deactivated within 12 m (40 ft) of a blast site, or within the distance mandated under applicable legal requirements. Failure to do so could cause interference with blasting operations and result in serious injury or death.
Down Hill Travel (10)This warning label is located in the cab on the inside of the front door post.
Illustration 11 g02151383
This wheel loader is not equipped with a retarder and should not be used for high speed, downgrade hauling operations. If the service brakes are overused when traveling downhill, the service brakes may overheat and fail which could result in serious injury or death. When traveling downhill, downshift to the proper gear and use engine braking to prevent excessive speed buildup and excessive use of the service brakes. When using the service brakes for downhill travel, always use the right brake pedal.