PIPE 5D1366 - Caterpillar

5D1366 PIPE Caterpillar parts 16

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5D1366
5D-1366
5D1366

Weight: 7 pounds 3 kg.

Buy PIPE 5D1366 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

$37.28

23 Jun 2022
13.0293[5.86] Pounds
US: ProperBuy

8N4445 Pipe Fits Caterpillar 5D1366
TCP Warranty

Show more prices Caterpillar parts

Number on catalog scheme: None

For full view, you need register

Compatible equipment models: 5D1366:

MOTOR GRADER 16 Caterpillar

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 390-1131 Timing Pin (Crankshaft) 1
B 435-3146 Timing Pin (Camshaft) 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear of damage. If necessary, replace any components that are worn or damaged.
If Tooling (A) and Tooling (B) are not installed, install Tooling (A) and install Tooling (B). Refer to Disassembly and Assembly, "Fuel Injection Pump Gear - Remove" for the correct procedure.
Illustration 1 g02937163
If necessary, install locating pin (6) into fuel injection pump shaft (7).
Ensure that locating pin (6) is 45 degrees from vertical and parallel to the center of Torx head plug (5), refer to Illustration 1.
Position gear (8) onto fuel injection pump shaft (7).
Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install" for the correct procedure.
Install the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Install" for the correct procedure.
Illustration 2 g02937277
Remove Tooling (B) from the front housing.
Install new O-ring seal (1) to plug (2).
Install plug (2). Tighten the plug to a torque of 25 N m (221 lb in).
Install new O-ring seal (3) to plug (4).
Install plug (4). Tighten the plug to a torque of 30 N m (266 lb in).
If equipped, install the accessory drive. Refer to Disassembly and Assembly, "Accessory Drive - Remove and Install" for the correct procedure.