PIPE-EXHAUST 5E9362 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     8S-2264     Puller Group     1    
4B-3903 Bolt     2    
1P-0456 Plate     1    
4B-4277 Washer     2    
B     9S-9152     Bearing Puller Gp     1    
C     1P-0510     Driver Gp     1    Start By:
Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01045505
Remove O-ring seal (4) from water pump housing (3) .
Remove O-ring seal (6) from inlet adapter (1) .
Remove inlet adapter (1) from water pump housing (3) . Remove O-ring seal (2) .
Remove water pump filter (17) from water pump housing (3) .
Remove bolt (11) and washer (9) from water pump shaft (13) .
Use Tooling (A) to remove impeller (7) from water pump shaft (13) .
Remove bolt (12) and washer (10) from water pump shaft (13) .
Remove gear (5) from water pump shaft (13) .
Remove bolts (18) and retainer (8) from the water pump housing.
Remove water pump shaft (13) from the water pump housing.
Use a suitable press and Tooling (B) to remove bearing assembly (15) from water pump shaft (13) .
Use a suitable press and Tooling (C) to remove seal group (14) from water pump housing (3) .
Use a suitable press and Tooling (C) to remove lip seal (16) from water pump housing (3) .