5I7712 PIPE Caterpillar parts
320 L, 320B, 320B L, 320N
Rating:
Alternative (cross code) number:
CA5I7712
5I-7712
5I7712
CA5I7712
5I-7712
5I7712
Weight: 0.42 pounds 0 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 5I7712 Pipe Fuel Line 6 Assembly for Model 3066
CTP For Model 3066 || Highly Efficient || Easy in-and-out fit
CTP For Model 3066 || Highly Efficient || Easy in-and-out fit
CTP 5I7712 Pipe Fuel Line 6 Assembly for Model 3066
CTP For Model 3066 || Highly Efficient || Easy in-and-out fit
CTP For Model 3066 || Highly Efficient || Easy in-and-out fit
Number on catalog scheme:
14
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01238471
Remove bolts (1) and the retainers. Remove air pipes (2) . Remove the O-ring seals from the air pipes.
If necessary, remove bolts (5) and remove adapters (4) . Remove the O-ring seals from the adapters.
Attach Tooling (A) and a suitable lifting device to the top of air inlet cover (3) . The weight of air inlet cover (3) is approximately 35 kg (77 lb).
Remove bolts (6) . Remove air inlet cover (3) .Note: Be careful not to damage the fins of the aftercooler core.
Illustration 2 g01238477
Disconnect tube assembly (7) and tube assembly (8) . Remove the O-ring seals from the tube assemblies.
Attach a suitable lifting device onto aftercooler core (9) . The weight of the 3508C aftercooler core is approximately 60 kg (132 lb). The weight of the 3512C aftercooler core is approximately 85 kg (187 lb). Remove aftercooler core (9) from the air inlet manifold. Remove seals (10) from aftercooler core (9) .Note: Be careful not to damage the fins of the aftercooler core.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 1U-6395 O-Ring Assembly Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Be careful not to damage the fins of the aftercooler cores.
Illustration 3 g01238477
Install seal (10) on the bottom of aftercooler core (9) . Temporarily secure the bottom seal with tape. Make sure that the tape can be removed after the aftercooler core is installed. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal.
Attach a suitable lifting device onto aftercooler core (9) . The weight of the 3508C aftercooler core is approximately 60 kg (132 lb). The weight of the 3512C aftercooler core is approximately 85 kg (187 lb). Position aftercooler core (9) onto the air inlet manifold. Ensure that the bottom seal is properly seated.
Install seal (10) on top of the aftercooler core
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01238471
Remove bolts (1) and the retainers. Remove air pipes (2) . Remove the O-ring seals from the air pipes.
If necessary, remove bolts (5) and remove adapters (4) . Remove the O-ring seals from the adapters.
Attach Tooling (A) and a suitable lifting device to the top of air inlet cover (3) . The weight of air inlet cover (3) is approximately 35 kg (77 lb).
Remove bolts (6) . Remove air inlet cover (3) .Note: Be careful not to damage the fins of the aftercooler core.
Illustration 2 g01238477
Disconnect tube assembly (7) and tube assembly (8) . Remove the O-ring seals from the tube assemblies.
Attach a suitable lifting device onto aftercooler core (9) . The weight of the 3508C aftercooler core is approximately 60 kg (132 lb). The weight of the 3512C aftercooler core is approximately 85 kg (187 lb). Remove aftercooler core (9) from the air inlet manifold. Remove seals (10) from aftercooler core (9) .Note: Be careful not to damage the fins of the aftercooler core.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 1U-6395 O-Ring Assembly Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Be careful not to damage the fins of the aftercooler cores.
Illustration 3 g01238477
Install seal (10) on the bottom of aftercooler core (9) . Temporarily secure the bottom seal with tape. Make sure that the tape can be removed after the aftercooler core is installed. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal.
Attach a suitable lifting device onto aftercooler core (9) . The weight of the 3508C aftercooler core is approximately 60 kg (132 lb). The weight of the 3512C aftercooler core is approximately 85 kg (187 lb). Position aftercooler core (9) onto the air inlet manifold. Ensure that the bottom seal is properly seated.
Install seal (10) on top of the aftercooler core
Caterpillar parts catalog:
Parts pipe Caterpillar catalog:
320 L, 320B, 320B L, 320N
320 L, 320B, 320B L, 320N
320 L, 320B, 320B L, 320N
320 L, 320B, 320B L, 320N
320 L, 320B, 320B L, 320N
320B, 320C, 320C FM
320B, 320C, 320C FM
320B, 320C, 320C FM
320B, 320C, 320C FM
320B, 320C, 320C FM
320 L
320B
320 L, 320B, 320B L, 320N
320 L, 320B, 320B L, 320N
320 L, 320B, 320B L, 320N
320 L, 320B, 320B L, 320N
320 L, 320B, 320B L, 320N
5I7705
PIPE
320 L, 320B, 320B L, 320N
320 L, 320B, 320B L, 320N
1216263
PIPE
320B, 322B
320B, 322B
1192415
PIPE AS
320B, 320B FM LL
320B, 320B FM LL
1192407
PIPE AS
320B
320B
1192409
PIPE AS
320B
320B
1370838
PIPE AS
320B, 320B FM LL
320B, 320B FM LL
1192482
PIPE AS
320B
320B