PIPE A-EXHAUST 5L5031 - Caterpillar

Torque-pump drive coupling bolts ... 70 lb. ft.(9,7 mkg)Pump timing (before top center) ... 11°Pump timing (before top center) (No. 16 Motor Grader only) ... 16°(1) Torque-retaining bolt ... 32 3 lb.ft.(4,4 0,4 mkg)(2) Length-pump plunger ... 2.7574 .0003 in.(70,037 0,008 mm) Minimum permissible plunger length ... 2.7551 in. (69,980 mm)(3) Dimension-lifter setting: On engine (piston @ top center) ... 1.8301 .0005 in.(46,48 0,013 mm)Off engine ... 1.881 .002 in.(47,78 0,05 mm)Dimension-lifter setting (No. 16 Motor Grader only): On engine (piston @ top center) ... 1.8110 .0005 in.(45,99 0,013 mm)Off engine ... 1.881 .002 in.(47,78 0,05 mm)(4) Diameter-fuel rack (after plating) ... 609-.610 in.(15,47-15,49 mm) Bore-rack bearing ... .6125 .0005 in.(15,558 0,013 mm)Maximum permissible bearing clearance ... .005 in.(0,13 mm)(5) 3S1251 Spring-lifter: Length-test force applied ... 1.80 in.(45,72 mm)Test force ... 35.8 1.8 lbs.(16,2 0,8 kg)Free length after test ... 2.040 .010 in.(51,82 0,25 mm)Outside diameter ... 1.194 .010 in.(30,33 0,25 mm)(6) Diameter-camshaft bearing journal ... 2.1845 .0005 in.(55,486 0,013 mm) Bore-camshaft bearings ... 2.1875 .0005 in.(55,562 0,013 mm)Maximum permissible bearing clearance ... .007 in.(0,18 mm)(7) Torque-glow plug ... 120 24 lb. in.(138,4 27,6 cm.kg)(8) Torque-fuel line nut ... 30 5 lb. ft.(4,1 0,7 mkg)(9) Torque-nozzle retaining nut ... 105 5 lb. ft.(14,5 0,7 mkg)(10) Body(11) Nozzle finger tight in body(12) Torque-precombustion chamber ... 150 10 lb. ft.(20,7 1,4 mkg)