7R2901 PIPE Caterpillar parts
RM-250C, RR-250, SS-250
Rating:
Alternative (cross code) number:
CA7R2901
7R-2901
7R2901
CA7R2901
7R-2901
7R2901
Weight: 2 pounds 1 kg.
RECLAIMER MIXER, SOIL STABILIZER,
Compatible equipment models: 7R2901:
Information:
Removal Procedure
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
The engine oil pump idler gear can fall off of the pump when the pump is removed or installed. Injury may result. To help prevent injury, always hold the idler gear on the pump when the pump is removed or installed.
Illustration 1 g00501740
Remove bolt (1) and the lock washer that holds the suction bell to the oil pan plate.
Remove two bolts (3) that hold the scavenge line to engine oil pump (4) .
Remove four bolts (2) and the washers that hold engine oil pump (4) to the cylinder block. Hold the gears on the oil pump and remove the engine oil pump and the suction bell as a unit.
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
The engine oil pump idler gear can fall off of the pump when the pump is removed or installed. Injury may result. To help prevent injury, always hold the idler gear on the pump when the pump is removed or installed.
Illustration 1 g00501740
Remove bolt (1) and the lock washer that holds the suction bell to the oil pan plate.
Remove two bolts (3) that hold the scavenge line to engine oil pump (4) .
Remove four bolts (2) and the washers that hold engine oil pump (4) to the cylinder block. Hold the gears on the oil pump and remove the engine oil pump and the suction bell as a unit.
Caterpillar parts catalog:
Parts pipe Caterpillar catalog:
1666385
PIPE AS-EXHAUST
CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E, PS-360C
CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E, PS-360C
1607914
PIPE
CB-214D, CB-214E
CB-214D, CB-214E
1607913
PIPE
CB-214D
CB-214D
1199246
PIPE AS
CB-534B
CB-534B
1834341
PIPE AS
CB-334D, CB-334E, CB-335D
CB-334D, CB-334E, CB-335D
1444645
PIPE
CB-334D, CB-334E, CB-335D, CB-34
CB-334D, CB-334E, CB-335D, CB-34
2269574
PIPE
CB-534D, CB-564D
CB-534D, CB-564D
2065224
PIPE-FLEXIBLE
CB-534D, CB-564D
CB-534D, CB-564D
2047404
PIPE AS
CB-534D, CB-564D
CB-534D, CB-564D
2047402
PIPE
CB-534D, CB-564D
CB-534D, CB-564D
1883175
PIPE AS
PS-300B
PS-300B
1336035
PIPE
5130, 5130B, CP-433E, CP-44, CS-423E, CS-433E, CS-44, CS-64B, CW-34
5130, 5130B, CP-433E, CP-44, CS-423E, CS-433E, CS-44, CS-64B, CW-34