PIPE 9H9477 - Caterpillar

1. Remove the magnetic drain plug and drain the oil from the oil pan into a suitable container for storage or disposal.2. Disconnect sump pump line (1) from oil pan (if so equipped). Cap or plug all openings immediately.3. Remove the bolts (2) that hold oil pan to cylinder block.4. Remove the oil pan and gasket from the cylinder block.Install Oil Pan
1. Put the gasket and oil pan (1) in position on the engine, and install the bolts that hold the oil pan to the engine. Tighten the bolts that hold the oil pan to the engine to a torque of 55 10 N m (40 7 lb ft).2. Connect sump pump line (if so equipped).3. Install the magnetic drain plug and tighten the plug to a torque of 70 14 N m (50 10 lb ft).4. Fill engine with oil to the correct level. See the Operations & Maintenance Manual.