0997196 PISTON-BRAKE Caterpillar parts
311, 311B, 312, 312B, 315, 315B, 315B FM L, 317, E110B, OEMS
Rating:
Alternative (cross code) number:
CA0997196
099-7196
0997196
CA0997196
099-7196
0997196
Weight: 6 pounds 3 kg.
EXCAVATOR, UNDERCARRIAGE,
Compatible equipment models: 0997196:
Number on catalog scheme:
25
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01152433
Install shaft (9) onto engine oil pump (4). Use Tooling (A) and a suitable press in order to install bearing (10) into idler gear (11). Position idler gear (11) on shaft (9). Install bolt (12) and the washer.
Illustration 2 g06348586
Mount the engine oil pump (4) to the cylinder block by hand tightening the mounting bolts (3) into the cylinder block.Note: Ensure that the mounting surfaces for the engine oil pump are thoroughly clean.
Without the O-rings, assemble the outlet elbow (6) between the block and the oil pump, using the washers and bolts (2) and (5). Hand tighten only.
Illustration 3 g06348599
Adjust the outlet elbow and the pump to ensure that no gaps exist between the outlet elbow (6) and the block or between the outlet elbow and the pump at locations (X).
Remove the outlet elbow.
Place O-ring seal (13) between the elbow and the engine block.Note: Inspect the condition of the O-ring seal. Replace the O-ring seal, if necessary.
Place O-ring seal (14) between the elbow and the pump.
Torque bolt (5) between the elbow and the pump.
Illustration 4 g06348619
Tighten bolt (3A) first , then tighten bolt (3B).
Mount the pickup tube (8) to the pump, hand tightening bolts (7).
If needed, align the bolt holes by applying pressure to the support legs on the pickup tube.
Tighten bolts (7).
Tighten bolts (1).End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01152433
Install shaft (9) onto engine oil pump (4). Use Tooling (A) and a suitable press in order to install bearing (10) into idler gear (11). Position idler gear (11) on shaft (9). Install bolt (12) and the washer.
Illustration 2 g06348586
Mount the engine oil pump (4) to the cylinder block by hand tightening the mounting bolts (3) into the cylinder block.Note: Ensure that the mounting surfaces for the engine oil pump are thoroughly clean.
Without the O-rings, assemble the outlet elbow (6) between the block and the oil pump, using the washers and bolts (2) and (5). Hand tighten only.
Illustration 3 g06348599
Adjust the outlet elbow and the pump to ensure that no gaps exist between the outlet elbow (6) and the block or between the outlet elbow and the pump at locations (X).
Remove the outlet elbow.
Place O-ring seal (13) between the elbow and the engine block.Note: Inspect the condition of the O-ring seal. Replace the O-ring seal, if necessary.
Place O-ring seal (14) between the elbow and the pump.
Torque bolt (5) between the elbow and the pump.
Illustration 4 g06348619
Tighten bolt (3A) first , then tighten bolt (3B).
Mount the pickup tube (8) to the pump, hand tightening bolts (7).
If needed, align the bolt holes by applying pressure to the support legs on the pickup tube.
Tighten bolts (7).
Tighten bolts (1).End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Caterpillar parts catalog:
Parts piston Caterpillar catalog:
315, 315B, 939C, D5C III, D5G
311, 311B, 312B, 320 L, 320B
311, 311B, 312B, 320 L, 320B
311, 311B, 312B, 320 L, 320B
1090, 1190, 1190T, 1390, 2290, 2390, 2391, 320 L, 320B, 320B FM LL, 322B L, 322C, 324D FM, 325, 325 L, 325 LN, 325B, 325B L, 511, 521, 522, OEMS, TK711, TK721, TK722, TK741
322, 322 FM L, 322 LN, 322B L, 322B LN, OEMS
320 L, 320B, 320B L, 320N, 345B, 345B L, OEMS
1290T, 1390, 330, 330 FM L, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D FM, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D L, 350, 532, 541, 551, 552, OEMS, TK1051, T...
320 L, 320N, 322 FM L, 325, 325 L, 325 LN, OEMS
330, 330 FM L, 330 L, E300B, OEMS
320 L, 320N, OEMS
330, 330 FM L, 330 L, 330B, 330B L, OEMS
1251551
PISTON
307B, 307C, 307D, 308C, 308D, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 314C, 314D CR, 314D LCR, 315C, 315D L
307B, 307C, 307D, 308C, 308D, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 314C, 314D CR, 314D LCR, 315C, 315D L
311, 311B, 312, 312B, 312B L, 312C L
8U9165
PISTON
312, 312B L, 315, 317
312, 312B L, 315, 317
5I3044
PISTON
311, 312
311, 312
311, 311B, 312, 315, 317, 320 L, OEMS
0874667
PISTON
307, 307B, 311, 312, 315, 317, 320 L, 320B, 322 FM L, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330 L, 330B L, 345B II, 345B L, 345C L, 350, 350 L, 365B, 365B II, 365C, 365C L, 365C L MH, 375, 375 L,...
307, 307B, 311, 312, 315, 317, 320 L, 320B, 322 FM L, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330 L, 330B L, 345B II, 345B L, 345C L, 350, 350 L, 365B, 365B II, 365C, 365C L, 365C L MH, 375, 375 L,...
311, 311B, 312, 312B, 312B L, 313B, E110B, E120B
312, 312B
7I1121
PISTON AS
312, 312B, 313B
312, 312B, 313B
7I1083
PISTON AS
312
312
1281875
PISTON
312
312