PISTON RING SET 0998414 - Caterpillar

Illustration 1 g00954689
(2) Thickness of 6DE3262 Shim Pack ... 2.30 mm (0.090 inch)Add shims as needed to get correct endplay of gear (1) of ... 0.15 0.05 mm (0.006 0.002 inch) (3) Apply 155-0695 Thread Lock Compound to the bolt threads prior to assembly. Torque for the eight bolts that fasten the bearing cage to the housing ... 50 7 N m (37 5 lb ft) (5) Thickness of 6DE3261 Shim Pack ... 2.30 mm (0.090 inch)Add shims as needed to get correct end play of gear (20) of ... 0.15 0.05 mm (0.006 0.002 inch) (6) Apply 155-0695 Thread Lock Compound to the bolt threads prior to assembly. Torque for the eight bolts that fasten the bearing cage and the cover to the housing ... 50 7 N m (37 5 lb ft) (10) Apply 4C-9507 Retaining Compound to the bolt threads prior to assembly. Torque for the retaining bolt that fastens the gear to the output shaft ... 240 25 N m (177 18 lb ft) (12) Apply 155-0695 Thread Lock Compound to the bolt threads prior to assembly. Torque for the ten bolts that fasten the bearing cage to the housing ... 50 7 N m (37 5 lb ft) (13) Thickness of 6DE3260 Shim Pack ... 2.30 mm (0.090 inch)Add shims as needed to get correct endplay of gear (14) of ... 0.05 +0.05 -0.00 mm (0.002 +0.002 -0.000 inch) (16) Apply 155-0695 Thread Lock Compound to the bolt threads prior to assembly. Torque for the ten bolts that fasten the inner bearing cage ... 50 7 N m (37 5 lb ft) (17) Apply 155-0695 Thread Lock Compound to the bolt threads prior to assembly. Torque for the 13 bolts that fasten the torque converter assembly to the housing ... 135 20 N m (100 15 lb ft) (18) Apply 155-0695 Thread Lock Compound to the bolt threads prior to assembly. Torque for the 11 bolts that fasten the updrive assembly to the flywheel housing ... 105 20 N m (77 15 lb ft)Procedure to Obtain the Correct Bearing Endplay for the Torque Converter Updrive gears
Table 1
Required Tools    
Part Number     Part Description     Qty    
1DE2841     Lever Assembly     1    Note: To correctly adjust the bearing endplay in the torque converter updrive gears, the torque converter must be removed from the torque converter housing.
Place the torque converter updrive housing in a horizontal position with the output end upright.
Install bearing cage (15) in the updrive housing assembly. Apply 155-0695 Thread Lock Compound to the bolt threads prior to assembly. Install ten bolts (16). Tighten the bolts to a torque of 50 7 N m (37 5 lb ft).
Install gear (14) in the updrive housing. Install the full 6DE3260 Shim Pack (13) and bearing cage (11). Do not install the O-ring seals on bearing cage (11). Install ten