PISTON-CLUTCH 1045360 - Caterpillar

Never bend the eyebolts and the brackets. Only load the eyebolts and the brackets under tension. Remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90 degrees.When it is necessary to remove a component at an angle, only use a link bracket that is properly rated for the weight.
Use a hoist to remove heavy components. Use an adjustable lifting beam to lift the entire package. Use an adjustable lifting beam to lift the engine. All supporting members (chains and cables) should be parallel to each other. The chains and cables should be perpendicular to the top of the object that is being lifted.Some removals require lifting fixtures in order to obtain proper balance. Lifting fixtures also help to provide safety.Lifting eyes are designed and installed for each package. Alterations to the lifting eyes and/or the package make the lifting eyes and the lifting fixtures obsolete. If alterations are made, ensure that proper lifting devices are provided. Consult your Cat dealer for information regarding fixtures for proper lifting.
Improper lifting or tiedowns can allow load to shift and can cause injury and damage.
Illustration 1 g01034418
Label for lifting eye
Lifting labels are located on the lifting eyes and on the bottom of the genset. Lifting labels may be placed in other locations also. These labels designate the proper lifting locations for the genset and the weight that may be safely lifted from the location. Some gensets may be lifted at the base of the genset. Use the configuration that is on the lifting label in order to lift the generator set. Use lifting devices that are properly rated for the weight of the generator set.Note: Never lift a generator set that has fuel on board.The following labels will be on the genset. Take care to review the weight limits before lifting the genset.
Illustration 2 g01187534
Message for the Center of Gravity
Illustration 3 g03392083
Message for 4 point lifting
Lifting the Entire Package
Do NOT use the engine lifting eyes or the generator lifting eyes to lift the entire package. Lifting points (3) have been provided on the base rails of the generator set for lifting the entire package. However, lifting the engine and the generator together requires special equipment and procedures. Consult your Cat dealer for information regarding fixtures for proper lifting of your complete package.Lifting the Engine Only
To remove the engine ONLY, use lifting eyes (2) that are on the engine.Lifting the Generator Only
Note: The control panel and the terminal will need to be removed before attempting to lift the generator.To remove the generator ONLY, use lifting eyes (1) that are on the generator.Engine Lifting with a Fuel Tank
Lifting the engine with a fuel tank that is mounted to the engine requires special equipment and procedures. Do not lift the unit with fuel in the fuel tank. Consult your Caterpillar dealer for information regarding fixtures for proper lifting of your complete package.