PISTON AS 1140492 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-2241 Camshaft Bearing Tool Group 1
8H-0684 Ratchet Wrench 1 Start By:
Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00546333
Illustration 2 g00546238
Use the Tooling (A) in order to remove the camshaft bearing (1) from the cylinder block. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 8S-2241 Camshaft Bearing Tool Group 1
8H-0684 Ratchet Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g00546238
Illustration 4 g00546333
Use the Tooling (A) in order to install the camshaft bearing (1) into the bore in the cylinder block. Note: Align the oil hole in camshaft bearing (1) with the oil hole in the bore in the cylinder block. Note: The camshaft bearing must be inserted until the front edge of the bearing is flush with the face of the recess in the cylinder block.End By:
Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".