1259095 PISTON Caterpillar parts
623E, 623F, 623G, 795F AC, 795F XQ, 797, 797B, M315, M315C, M315D, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M322D MH
Rating:
Alternative (cross code) number:
CA1259095
125-9095
1259095
CA1259095
125-9095
1259095
Weight: 0.57 pounds 0 kg.
TRUCK, WHEELED EXCAVATOR,
Compatible equipment models: 1259095:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 189-0412 Clevis 2
C 140-7742 Sleeve 2 Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g01452590
Attach Tooling (A) and a suitable lifting device to fuel tank (11). The weight of fuel tank (11) is approximately 272 kg (600 lb). Position fuel tank (11) and install the mounting bolts.
Illustration 2 g01452469
Install hose assembly (9) and harness assembly (10) onto fuel tank (11).
Illustration 3 g01452432
Illustration 4 g01452396
Attach Tooling (C) and a suitable lifting device to the front of bumper assembly (7), as shown. Repeat for the opposite side. The weight of bumper assembly is approximately 5443 kg (12000 lb).
Position Tooling (B) and a suitable lifting device to the rear of bumper assembly (7) through the hole at location (X), as shown.
Position bumper assembly (7) onto the machine and install bolts (8).
Illustration 5 g01452366
Connect hose assemblies (5) and harness assembly (6).
Illustration 6 g01452236
Install covers (4).
Illustration 7 g01452235
Attach a suitable lifting device to step assembly (3). The weight of step assembly (3) is approximately 27 kg (60 lb). Install step assembly (3).
Illustration 8 g01452234
Attach Tooling (A) and a suitable lifting device to ladder assembly (2). The weight of ladder assembly (39) is approximately 145 kg (320 lb). Install ladder assembly (39). Repeat for the ladder assembly on the opposite side.
Illustration 9 g01452233
Install hand rail assemblies (1). Repeat for the opposite side. End By:
Install the right fuel tank Refer to Disassembly and Assembly, "Fuel Tank (Right Side) - Install".
Install the left fuel tank Refer to Disassembly and Assembly, "Fuel Tank (Left Side) - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 189-0412 Clevis 2
C 140-7742 Sleeve 2 Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g01452590
Attach Tooling (A) and a suitable lifting device to fuel tank (11). The weight of fuel tank (11) is approximately 272 kg (600 lb). Position fuel tank (11) and install the mounting bolts.
Illustration 2 g01452469
Install hose assembly (9) and harness assembly (10) onto fuel tank (11).
Illustration 3 g01452432
Illustration 4 g01452396
Attach Tooling (C) and a suitable lifting device to the front of bumper assembly (7), as shown. Repeat for the opposite side. The weight of bumper assembly is approximately 5443 kg (12000 lb).
Position Tooling (B) and a suitable lifting device to the rear of bumper assembly (7) through the hole at location (X), as shown.
Position bumper assembly (7) onto the machine and install bolts (8).
Illustration 5 g01452366
Connect hose assemblies (5) and harness assembly (6).
Illustration 6 g01452236
Install covers (4).
Illustration 7 g01452235
Attach a suitable lifting device to step assembly (3). The weight of step assembly (3) is approximately 27 kg (60 lb). Install step assembly (3).
Illustration 8 g01452234
Attach Tooling (A) and a suitable lifting device to ladder assembly (2). The weight of ladder assembly (39) is approximately 145 kg (320 lb). Install ladder assembly (39). Repeat for the ladder assembly on the opposite side.
Illustration 9 g01452233
Install hand rail assemblies (1). Repeat for the opposite side. End By:
Install the right fuel tank Refer to Disassembly and Assembly, "Fuel Tank (Right Side) - Install".
Install the left fuel tank Refer to Disassembly and Assembly, "Fuel Tank (Left Side) - Install".
Cat SIS web machinery list:
Parts piston Caterpillar catalog:
1219944
PISTON
572R, 572R II, M315, M318, M320
572R, 572R II, M315, M318, M320
1589062
PISTON
318C, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320D, 320D FM, 320D FM RR, 320D2, 320D2 L, 322C, 323D L, 323D LN, 323D SA, 324D L, 325B L, 325C, 325D, 325D L, 329D L, 330B L, 330C, 330D L, 336D L, 345B...
318C, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320D, 320D FM, 320D FM RR, 320D2, 320D2 L, 322C, 323D L, 323D LN, 323D SA, 324D L, 325B L, 325C, 325D, 325D L, 329D L, 330B L, 330C, 330D L, 336D L, 345B...
1463315
PISTON AS
623E, 623F, 623G, 793C, 797, 797B, 797F, 938G II, M315D, M317D 2
623E, 623F, 623G, 793C, 797, 797B, 797F, 938G II, M315D, M317D 2
1656969
PISTON AS
5130, 5130B, 5230, 623E, 623F, 623G, 988F, 988F II, D10N, D10R, D10T, D11R, D11T, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N
5130, 5130B, 5230, 623E, 623F, 623G, 988F, 988F II, D10N, D10R, D10T, D11R, D11T, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N
1656970
PISTON AS
583T, 797, 844H, 990H, D11R, D11T, D8R, D8R II, D8T, D9R, D9T, PL83
583T, 797, 844H, 990H, D11R, D11T, D8R, D8R II, D8T, D9R, D9T, PL83
1894724
PISTON AS
12H, 140H, 14H, 16H, 330C, 330C FM, 330C L, 330C MH, 621G, 623G, 627G, 631E, 631G, 637E, 637G, 725, 730, 735, 735B, 740, 740B, 844K, 938G, 950G, 990K, 993K, D10N, D10R, D10T, D250E II, D300E II, D350E...
12H, 140H, 14H, 16H, 330C, 330C FM, 330C L, 330C MH, 621G, 623G, 627G, 631E, 631G, 637E, 637G, 725, 730, 735, 735B, 740, 740B, 844K, 938G, 950G, 990K, 993K, D10N, D10R, D10T, D250E II, D300E II, D350E...
1559112
PISTON AS
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 330D L, 330D LN, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 651E...
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 330D L, 330D LN, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 651E...
3P0798
PISTON-CLUTCH
621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633C, 633D, 633E II, 637D, 637E, 637G,...
621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633C, 633D, 633E II, 637D, 637E, 637G,...
8P4520
PISTON-CLUTCH
621E, 621F, 621G, 623B, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631C, 631E, 631G, 633C, 633D, 633E II, 637D, 637E, 637G, 657E, 657G, 769C, 772B, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775...
621E, 621F, 621G, 623B, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631C, 631E, 631G, 633C, 633D, 633E II, 637D, 637E, 637G, 657E, 657G, 769C, 772B, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775...
9J5549
PISTON
797, 980C, 980F, 980F II, 980G, 980G II
797, 980C, 980F, 980F II, 980G, 980G II
6E1440
PISTON
795F AC, 795F XQ, 797, 797B, 797F, 950G, 950G II, 962G, 962G II, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, 972G II, 992C, 992D, R1300, R1300G, R1300G II, R1600
795F AC, 795F XQ, 797, 797B, 797F, 950G, 950G II, 962G, 962G II, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, 972G II, 992C, 992D, R1300, R1300G, R1300G II, R1600
9V3222
PISTON AS
24H, 24M, 69D, 735, 740, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777, 777D, 784B, 784C, 785, 785B, 785C, 789, 789B, 789C, 793B, 793C, 797, 824C, 980C, 980F, 980F ...
24H, 24M, 69D, 735, 740, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777, 777D, 784B, 784C, 785, 785B, 785C, 789, 789B, 789C, 793B, 793C, 797, 824C, 980C, 980F, 980F ...
1219944
PISTON
572R, 572R II, M315, M318, M320
572R, 572R II, M315, M318, M320
1219945
PISTON
572R, 572R II, M315, M318, M320
572R, 572R II, M315, M318, M320
1219916
PISTON
572R, 572R II, 574, 574B, M315, M318, M320
572R, 572R II, 574, 574B, M315, M318, M320
1178187
PISTON
539, M318, M320
539, M318, M320
1182712
PISTON
M312, M315, M318, M320
M312, M315, M318, M320
1182709
PISTON
M318
M318
1230696
PISTON
M312, M315, M318, M320
M312, M315, M318, M320
1199379
PISTON
M312, M315, M318, M320
M312, M315, M318, M320
8U6329
PISTON
205B, 206B, 212B, M312, M315, M318, M320
205B, 206B, 212B, M312, M315, M318, M320
8U6325
PISTON
205B, 206B, 212B, M312, M315, M318, M320
205B, 206B, 212B, M312, M315, M318, M320
1258774
PISTON
M312, M315, M318
M312, M315, M318
1259108
PISTON
623E, 623F, 623G, 793C, 797, M315, M315C, M315D, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M322D MH
623E, 623F, 623G, 793C, 797, M315, M315C, M315D, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M322D MH