PISTON-CLUTCH 1324451 - Caterpillar

Illustration 1 g01264140
(A) Dump Reach (B) Dump HeightNote: In the European countries, regulations require a load sensing indicator and a boom lowering control device if more than 1000 kg (2204.6 lb) is lifted with the loader during object handling applications. Even though the hydraulic lift capacity exceeds 1000 kg (2204.6 lb) for the object handling application, the rated object handling capacity for the loader is 1000 kg (2204.6 lb) in European countries due to these regulations.Rated Load for Pallet Forks
For North American applications, the rated operating load is defined by the SAE standard "J1197 February 1991". The rated operating load is defined as the lesser value of 50% of the static tipping capacity or the hydraulic lift capacity. The intended operating range of the pallet forks starts from the fully racked back position. The range ends at the top face of the pallet forks at 20° below the horizontal at any given lift height.For European applications, the rated operating load is defined by "CEN 474-4 Feb. 1996". The rated operating load is defined as the lesser value of 80% of the static tipping capacity or the hydraulic lift capacity over firm and level ground. In rough terrain, the rated operating load is defined as the lesser value of 60% of the static tipping capacity or the hydraulic lift capacity. The intended operating range of the pallet forks starts from the fully racked back position. The range ends at the top face of the pallet forks at 20° below the horizontal at any given lift height.
Illustration 2 g01263921
(A) Reach (B) Placement Height 414E Loader Buckets
The following tables provide the rated operating loads for the standard machine that is equipped with the given bucket. The corresponding dump clearance is given for each bucket at maximum lift height and at the full dump angle. The reach is given for each bucket at maximum lift height and at the full dump angle. Clearance is measured from the ground to the bucket edge in order to dump the load. The reach is measured from the front grill to the bucket edge.
Illustration 3 g01264140
(A) Dump Reach (B) Dump Height
Table 1
Rated Bucket Load For A 414E With Single Tilt    
Bucket Part Number     Volumetric Rating     "CEN 474-4" and "SAE J818" Rated Operating Load     Dump Height (B)     Dump Reach (A)    
216-8760    
0.76 m3 (1.00 yd3)    
2499 kg (5509 lb)    
2651 mm (8 ft 8 in)    
773 mm (2 ft 6 in)    
251-1780    
0.76 m3 (1.00 yd3)    
2471 kg (5448 lb)    
2651 mm (8 ft 8 in)    
773 mm (2 ft 6 in)    
251-1789    
0.96 m3