PISTON-CLUTCH 1643303 - Caterpillar

Removal Procedure
Start By:
Remove the cooling package. Refer to Disassembly and Assembly, "Cooling System Package (Radiator, Aftercooler, Refridgerant condensor) - Remove".
Personal injury or death can result from improper lifting or blocking.When a hoist or jack is used to lift any part or component, stand clear of the area. Be sure the hoist or jack has the correct capacity to lift a component. Install blocks or stands before performance of any work under a heavy component.Approximate weights of the components are shown. Clean all surfaces where parts are to be installed.
Illustration 1 g01207154
Remove bolts (1) and shroud assembly (2) .
Illustration 2 g01207157
Remove bolts (3) and mount assembly (4). Remove bolts (5) and condenser (6) .
Illustration 3 g01207162
Attach a suitable lifting device to aftercooler (7). The weight of aftercooler (7) is approximately 29 kg (65 lb).
Remove bolts (8) and brackets (9) .
Remove aftercooler (7) .Installation Procedure
Illustration 4 g01207162
Attach a suitable lifting device to aftercooler (7) and position aftercooler (7). The weight of aftercooler (7) is approximately 29 kg (65 lb).
Position brackets (9) and install bolts (8) .
Illustration 5 g01207157
Position condenser (6) and install bolts (5). Position mount assembly (4) and install bolts (3) .
Illustration 6 g01207154
Position shroud assembly (2) and install bolts (1) .End By: Install the cooling package. Refer to Disassembly and Assembly, "Cooling System Package (Radiator, Aftercooler, Refridgerant condensor) - Install".