1760824 PISTON AS Caterpillar parts
3054, 3056, 317, 416C, 428C, CB-534B, CB-535B, CP-433C, CS-431C
Rating:
Alternative (cross code) number:
CA1760824
176-0824
1760824
CA1760824
176-0824
1760824
BACKHOE LOADER, VIBRATORY COMPACTOR,
Compatible equipment models: 1760824:
Number on catalog scheme:
7
For full view, you need register
Information:
Test For An Open Circuit
Table 1
Troubleshooting Test Steps Values Results
1. Identify Open Circuit
A. Identify the connectors and the wire numbers of the suspect circuits. Use the Electrical System Schematic of the machine to identify the circuits.
B. Turn the key start switch and the disconnect switch OFF.
C. Disconnect the component and the ECM from the wiring harness.
D. At one of the disconnected harness connections, place a jumper wire from the contact of the suspect wire to frame ground.
E. At the other connector of the machine harness, use the multimeter probes to measure the resistance. Measure the resistance from the contact of the suspect wire to frame ground.
The resistance is less than 5 Ω. OK - The harness circuit is correct.
STOP.
NOT OK - The resistance is greater than 5K Ω. There is an open in the machine harness.
Repair: Repair or replace the machine harness.
Note: A resistance that is greater than 5 Ω but less than 5K Ω would indicate a loose connection or a corroded connection in the circuit. A resistance measurement that is greater than 5K Ω would indicate an open in the circuit.
STOP.
Table 1
Troubleshooting Test Steps Values Results
1. Identify Open Circuit
A. Identify the connectors and the wire numbers of the suspect circuits. Use the Electrical System Schematic of the machine to identify the circuits.
B. Turn the key start switch and the disconnect switch OFF.
C. Disconnect the component and the ECM from the wiring harness.
D. At one of the disconnected harness connections, place a jumper wire from the contact of the suspect wire to frame ground.
E. At the other connector of the machine harness, use the multimeter probes to measure the resistance. Measure the resistance from the contact of the suspect wire to frame ground.
The resistance is less than 5 Ω. OK - The harness circuit is correct.
STOP.
NOT OK - The resistance is greater than 5K Ω. There is an open in the machine harness.
Repair: Repair or replace the machine harness.
Note: A resistance that is greater than 5 Ω but less than 5K Ω would indicate a loose connection or a corroded connection in the circuit. A resistance measurement that is greater than 5K Ω would indicate an open in the circuit.
STOP.
Caterpillar parts catalog:
Parts piston Caterpillar catalog:
12G, 130G, 140G, 160G, 416C, 426C, 428C, 436C, 438C
416C, 416D, 420D, 424D, 428C, 428D, 432D, 438C, 438D, 442D, 928HZ, 930G
416C, 416D, 420D, 426C, 430D, 436C, 583T, PL83
416C, 416D, 420D, 426C, 430D, 436C, 769D, 770, 770G, 770G OEM, 771D, 772, 772G, 772G OEM, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 784C, 785C, 785D, 834K...
416C, 416D, 420D, 428C, 430D, 432D, 438C, 438D, 442D
267, 267B, 287, 906H, 906H2, 907H, 907H2, 908H, 908H2, CB-434B, CB-434C, CB-534B, CB-534C, CB-534D, CB-535B, CB-564D, CB-634C, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-531D, CS-533D, CS-56, CS-563D, ...
3054, 3056, 914G, IT14G, M312, M315
3054, 3056, 914G, IT14G, M312, M315
3056, 914G, IT14G, M312, M315
3056, 914G, IT14G, M312, M315
3056, 914G, IT14G, M312, M315
311, 311B, 312, 315, 317, 320 L, OEMS
216, 216B, 216B3, 232B, 242B, 3024, 3024C, 304.5, AP-255E, BB-621C, C2.2, CB-334E, CB-34, CB34B, CB34B XW, CC34B
1908377
PISTON AS
216, 228, 3034, 906
216, 228, 3034, 906
216, 236, 247, 267, 3034
216, 236, 247, 267, 3034
1755455
PISTON
35, 45, 55
35, 45, 55
35, 45, 55, 924G, 924GZ, 924H, 924HZ
1668761
PISTON
426C, 436C, 438C
426C, 436C, 438C
1547163
PISTON
426C, 436C
426C, 436C
416C, 416D, 420D, 426C, 430D, 436C, 769D, 770, 770G, 770G OEM, 771D, 772, 772G, 772G OEM, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 784C, 785C, 785D, 834K...
416C, 416D, 420D, 426C, 430D, 436C, 583T, PL83
416C, 416D, 420D, 424D, 428C, 428D, 432D, 438C, 438D, 442D, 928HZ, 930G
416C, 416D, 420D, 428C, 428D, 432D, 438C, 438D, 442D