PISTON G-BSC 1H2808 - Caterpillar

Removal Procedure
Start By:
Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Illustration 1 g00500549
Use two suitable lifting devices and a hoist to secure muffler (1) .
Install the muffler to the engine, as shown.
Illustration 2 g00505843
Remove the bolt and washer (2) from the muffler.
Loosen nut (3) from the muffler.
Illustration 3 g00505844
Remove two bolts and two washer (4) from the bracket.
Remove the muffler from the engine.Installation Procedure
Illustration 4 g00500549
Use two suitable lifting devices and a hoist to secure muffler (1) into position.
Illustration 5 g00505844
Install washers and bolts (4) to the bracket.
Illustration 6 g00505843
Tighten the washer and nut (3) to the muffler.
Install the washer and bolt (2) to the muffler.
Remove two suitable lifting devices and a hoist away from muffler (1) .End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".