PISTON 1H3759 - Caterpillar

Stop the engine, lower the bucket to the ground, move all control levers backward and forward to release the pressure in the hydraulic system. Slowly loosen the cap to release any pressure in the hydraulic tank. Let the hydraulic oil become cool before any lines are disconnected in the hydraulic system.
Mark the location of the bucket positioner and kickout group brackets in relation to the tilt cylinder in order to install it back to its original position. 1. Remove three bolts (1). 2. Remove hydraulic line (2). 3. Remove two tie wraps (3). Disconnect electrical connection (4).4. Remove bucket positioner and kickdown group. Install in reverse order.