PISTON 2478946 - Caterpillar

Illustration 1 g01013114
Table 1
773E Off-Highway Trucks That Are Equipped with a Dual Slope Body
Dimension Size
A 5.08 m (16.67 ft)
B 4.39 m (14.40 ft)
C 9.69 m (31.79 ft) The 773E Off-Highway Truck weighs approximately 43,310 kg (95,482 lb) when the truck is equipped with a dual slope body and body liners.Intended Use
The 773E Off-Highway Truck is an earthmoving machine. The 773E is classified as a dumper as described in ISO 6165:2001. This is a self-propelled wheeled machine with a rigid frame and wheel steering. This dumper has an open body that is intended for the following applications: transporting loose material and dumping loose materialApplication/Configuration Restrictions
The Target Gross Machine Operating Weight (including payload) for the 773E Off-Highway Truck is 99300 kg (219000 lb). The braking systems and the steering systems in the 773E Off-Highway Truck are in compliance with ISO standards when tested to Caterpillar Global Mining Division's 10/10/20 Overload policy.Cab structure is ROPS certified to ISO 3471:1994 up to 36800 kg (81100 lb) as a rigid frame dumper ROPS only option. This number excludes dumper body weight. This number also excludes carryback debris weight.Specified Useful Life or Expected Life
The specified useful life, defined as total years of operation, or expected life, defined as total machine hours, of this machine is dependent upon many factors including the machine owner’s desire to rebuild the machine back to factory specifications. Consult your Cat dealer for assistance in calculating overall owning and operating costs required to determine the machine’s specified useful life or expected life. The following items are required to obtain an economical specified useful life or expected life of this machine:
Perform regular preventive maintenance procedures as described in the Operation and Maintenance Manual.
Perform machine inspections as described in the Operation and Maintenance Manual and correct any problems discovered.
Perform system testing as described in the Operation and Maintenance Manual and correct any problems discovered.
Ensure that machine application conditions comply with Caterpillar’s recommendations.
Ensure that the operating weight does not exceed limits set by manufacturer.
Ensure that all frame cracks are identified, inspected, and repaired to prevent further development.