PISTON-BODY-YM 2506564 - Caterpillar

1. Remove four bolts (4) from panel (3). Remove two bolts (1) and washers from panel (2). Remove panel (2) and panel (3) (if so equipped). 2. Remove wires (6) from the alternator. Put identification on the wires to prevent mixing at installation.3. Loosen bolt (5). Remove the two bolts and washers that hold the alternator in position. Remove the belts from the pulley on the alternator. Remove alternator (7).Install Alternator
1. Put the alternator in position on the engine. Install the two bolts and washers that hold the alternator in position.2. Connect the wires to the correct terminals on the alternator.3. Put the belt on the pulley of the alternator. Make an adjustment to the belt tension. The movement of a used belt is 7/8 in. (22 mm) when a force of 25 lb. (11.3 kg) is made halfway between the pulleys. The movement of a new belt is 3/4 in. (19 mm) when the same force is made halfway between pulleys.4. Install the two panels (if so equipped).