PISTON AS 2828562 - Caterpillar

Installation of the 275-5877 Lift Link
Table 4
275-5877 Lift Link Revision -02 (D)    
Item    Qty    Part No    Description    
(1D)     5     2J-5997     Locknut    
(2D)     4     3B-8489     Grease Fitting    
(3D)     1     277-3810     Link    
(4D)     1     277-3811     Hydraulic Cylinder Gp    
(5D)     1     277-3812     Link    
(6D)     1     277-3813     Lift Link    
(7D)     3     299-7351     Bolt    
(8D)     2     7X-0429     Bolt    
Illustration 14 g03378938
(D) 275-5877 Lift Link (N3) Hardware is supplied with the 275-5873 Mast Gp
Use a suitable lifting device to lift the lift link (D) into position.
Install the lift link (D) onto the mast group (B) .Installation of the 275-5891 Snow Wing Lines and Mounting Gp
ReferenceSpecial Instruction, GEHS0511
Illustration 15 g03378943
(G) 275-5891 Snow Wing Lines and Mounting Gp
Use the instructions in Special Instruction, GEHS0511 for installation of the 275-5891 Snow Wing Lines and Mounting Gp .Installation of the 275-5875 Blade Gp
Table 5
275-5875 Blade Gp Revision -04 (C)    
Item    Qty    Part No    Description    
(1C)     1     3B-8489     Grease Fitting    
(2C)     2     4T-2968     Cutting Edge    
(3C)     1     277-3728     Moldboard Assembly    
(4C)     1     277-3731     Rubber Stop    
(5C)     1     1J-5929     Bolt    
(6C)     26     4F-3654     Bolt    
(7C)     26     4K-0367     Full Nut    
(8C)     1     6K-3632     Locknut    
(9C)     2     6V-5684     Bolt    
(10C)     2     8T-4223     Hard Washer    
Illustration 16 g03384661
Illustration 17 g03396486
(B) 275-5873 Mast Gp (C) 275-5875 Blade Gp (D) 275-5877 Lift Link (H) 390-1107 EXTENSION TUBE GP Note: The estimated weight of the 275-5875 Blade Gp is 400 kg (882 lb).
Use a suitable lifting device to lift the blade group (C) into position.
Attach the blade (C) to the mast (B), extension tube (J), and the lift link (D) .