2959690 PISTON AS Caterpillar parts
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
Rating:
Alternative (cross code) number:
CA2959690
295-9690
2959690
CA2959690
295-9690
2959690
Weight: 14 pounds 6 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 2959690:
Number on catalog scheme:
3
For full view, you need register
Information:
Installation Procedure for the 375-5574 Auxiliary Hydraulic Lines Gp
Illustration 2 g02712138
Boom nose
(C) 170 mm (6.7 inch)
(1) 1P-3703 Rectangular Seal
(3) 1P-3705 Rectangular Seal
(6) 7X-0584 Hard Washer
(7) 7Y-4538 Half Clamp
(8) 8T-4139 Bolt
(9) 8T-4183 Bolt
(10) 8T-4184 Bolt
(12) 8T-4223 Hard Washer
(15) 153-8798 Plate
(16) 173-7916 Half Clamp
(17) 187-9846 Tube As
(19) 237-3117 Tube As
(21) 350-4243 Tube As
(22) 350-4244 Tube As Note: Do not tighten the bolts or connections until later in the procedure.
Install plates (15) on the left and right mounting tabs on the boom nose with bolts (10) and washers (12). Note: Position tubes (17) and (19) approximately 170 mm (6.7 inch) from the center of the pin bore.
Position tube (17) on the right side of the boom. Install two clamps (16) on tube (17) with two bolts (8) and two washers (12) to plate (15).Install two clamps (16) on tube (17) with two bolts (10) and two washers (12) to the block on the boom.
Position tube (19) on the left side of the boom. Install two clamps (7) on tube (19) with two bolts (8) and two washers (12) to plate (15).Install two clamps (7) on tube (19) with two bolts (10) and two washers (12) to the block on the boom.
Connect tubes (17) and (22) with seal (3), four bolts (9), and four washers (6).
Connect tubes (19) and (21) with seal (1), four bolts (8), and four washers (6).
Illustration 3 g02712253
(1) 1P-3703 Rectangular Seal
(2) 1P-3704 Rectangular Seal
(4) 1P-5767 Half Flange
(5) 6V-0400 Half Flange
(7) 7Y-4538 Half Clamp
(8) 8T-4139 Bolt
(10) 8T-4184 Bolt
(11) 8T-4194 Bolt
(12) 8T-4223 Hard Washer
(13) 8T-6868 Bolt
(14) 151-2494 Bar
(16) 173-7916 Half Clamp
(18) 230-0494 Support As
(20) 282-5760 Hose As
(21) 350-4243 Tube As
(22) 350-4244 Tube As
(23) 356-8132 Hose As
Locate the two attachment plates on the boom and remove the existing bolts and washers. Area (A) and (B).
Install two bars (14) and support assembly (18) at area (A) with four bolts (13) and four washers (12).
Repeat step 7 at area (B).
Attach tube (22) to support assemblies (18) at area (A) and (B) with two half clamps (16), two bolts (8), and two washers (12).
Connect hose (23) to tube (22) with two flange halves (4), seal (2), four bolts (11), and four washers (12).
Use seal (2), two flange halves (4), four bolts (11), and four washers (12) to connect hose (23). to the front lines.
Attach tube (21) to support assemblies (18) at area (A) and area (B) with half clamps (7), two bolts (8), and two washers (12).
Connect hose (20) and tube (21) with two flange halves (5), seal (1), four bolts (10), and four washers (12).
Use seal (1), two flange halves (5), four bolts (10), and four washers (12) to connect hose (20) to the front lines.
Tighten all hose and tube connections. Tighten all the bolts.
Illustration 2 g02712138
Boom nose
(C) 170 mm (6.7 inch)
(1) 1P-3703 Rectangular Seal
(3) 1P-3705 Rectangular Seal
(6) 7X-0584 Hard Washer
(7) 7Y-4538 Half Clamp
(8) 8T-4139 Bolt
(9) 8T-4183 Bolt
(10) 8T-4184 Bolt
(12) 8T-4223 Hard Washer
(15) 153-8798 Plate
(16) 173-7916 Half Clamp
(17) 187-9846 Tube As
(19) 237-3117 Tube As
(21) 350-4243 Tube As
(22) 350-4244 Tube As Note: Do not tighten the bolts or connections until later in the procedure.
Install plates (15) on the left and right mounting tabs on the boom nose with bolts (10) and washers (12). Note: Position tubes (17) and (19) approximately 170 mm (6.7 inch) from the center of the pin bore.
Position tube (17) on the right side of the boom. Install two clamps (16) on tube (17) with two bolts (8) and two washers (12) to plate (15).Install two clamps (16) on tube (17) with two bolts (10) and two washers (12) to the block on the boom.
Position tube (19) on the left side of the boom. Install two clamps (7) on tube (19) with two bolts (8) and two washers (12) to plate (15).Install two clamps (7) on tube (19) with two bolts (10) and two washers (12) to the block on the boom.
Connect tubes (17) and (22) with seal (3), four bolts (9), and four washers (6).
Connect tubes (19) and (21) with seal (1), four bolts (8), and four washers (6).
Illustration 3 g02712253
(1) 1P-3703 Rectangular Seal
(2) 1P-3704 Rectangular Seal
(4) 1P-5767 Half Flange
(5) 6V-0400 Half Flange
(7) 7Y-4538 Half Clamp
(8) 8T-4139 Bolt
(10) 8T-4184 Bolt
(11) 8T-4194 Bolt
(12) 8T-4223 Hard Washer
(13) 8T-6868 Bolt
(14) 151-2494 Bar
(16) 173-7916 Half Clamp
(18) 230-0494 Support As
(20) 282-5760 Hose As
(21) 350-4243 Tube As
(22) 350-4244 Tube As
(23) 356-8132 Hose As
Locate the two attachment plates on the boom and remove the existing bolts and washers. Area (A) and (B).
Install two bars (14) and support assembly (18) at area (A) with four bolts (13) and four washers (12).
Repeat step 7 at area (B).
Attach tube (22) to support assemblies (18) at area (A) and (B) with two half clamps (16), two bolts (8), and two washers (12).
Connect hose (23) to tube (22) with two flange halves (4), seal (2), four bolts (11), and four washers (12).
Use seal (2), two flange halves (4), four bolts (11), and four washers (12) to connect hose (23). to the front lines.
Attach tube (21) to support assemblies (18) at area (A) and area (B) with half clamps (7), two bolts (8), and two washers (12).
Connect hose (20) and tube (21) with two flange halves (5), seal (1), four bolts (10), and four washers (12).
Use seal (1), two flange halves (5), four bolts (10), and four washers (12) to connect hose (20) to the front lines.
Tighten all hose and tube connections. Tighten all the bolts.
Caterpillar parts catalog:
Parts piston Caterpillar catalog:
246D, 24M, 262D, 272D, 277D, 279D, 287D, 289D, 299D, 305.5E, 345D, 345D L, 345D L VG, 349D, 349D L, 35, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 414E, 416E, 416F, 422E, 422F, 424B...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD, 365B, 365B II, 554, 621K, 623K, 623K LRC, 627K, 627K LRC, 735, 735B, 740, 740B, 776D, 77...
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 330D L, 330D LN, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 651E...
345C, 345C L, 345C MH, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 966G, 966G II, 972G, 972G II, 980G, CS-533E, W345C MH
1390, 2590, 320B, 320C, 320D, 320D FM, 320D2, 320D2 L, 322B LN, 322C, 322C FM, 323D L, 323D LN, 323D SA, 324D, 324D FM, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D L, 329D L, 329D LN, 329E, 33...
345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
325B L, 325C, 325C FM, 325D FM, 325D FM LL, 330B, 330B L, 330C FM, 330D FM, 345B II, 345B II MH, 345B L, 345C, 350, 365B, 365B II, 385B, 568 FM LL, M325C MH, M325D L MH
320C, 322C, 323D L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325C L, 325D, 325D FM, 325D L, 326D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 330C, 330C FM, 330C L, 330D, 330D FM, 330...
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 340D L, 345C, 345C L, 345D L, 349D, 349D L, 385C L
365B, 365B L, 385B
4335663
PISTON
374F L, 390F L
374F L, 390F L
1850325
PISTON-BRAKE
365B, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
1589009
PISTON AS
365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
2590901
PISTON
365B, 365B II, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
365B, 365B II, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
1362442
PISTON
345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B
345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B
7I7475
PISTON
350, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
350, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
2590817
PISTON AS
365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
2959692
PISTON AS
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
2003289
PISTON
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
1915677
PISTON AS
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
1915670
PISTON-BRAKE
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B