PISTON GP 2985889 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the condition of the gaskets. Replace the gaskets, if necessary.
Illustration 1 g01250354
Attach a suitable lifting device to turbocharger (9). The weight of turbocharger (9) is approximately 38 kg (84 lb).
Apply Tooling (A) to the studs on the exhaust manifold. Install turbocharger (9) and nuts (8) that attach turbocharger (9) to the exhaust manifold. Tighten nuts (8) to a torque of 54 5 N m (40 4 lb ft).
Illustration 2 g01250350
Install air inlet tube (5) and tube assembly (6).
Position the oil supply line and the gasket on the turbocharger. Install bolts (7) in the oil supply line.
Illustration 3 g01250347
Install bolts (1).
Install tube assembly (3).
Install oil drain tube (4) and bolts (2).
Fill the cooling system to the correct level with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".