3157856 PISTON AS Caterpillar parts
D10N, D10R, D10T
Rating:
Alternative (cross code) number:
CA3157856
315-7856
3157856
CA3157856
315-7856
3157856
Weight: 44 pounds 20 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
HHFDEEW 7 Piece Patio Dining Set Black Poly Rattan 25.2"-Armrest Height 3157856 Easy to install
HHFDEEW Item Offered:7Ps || Material:Powder-Coated Steel,Tempered Glass;Steel,Polyethylene with a Rattan Look || Armrest Height:25.2" || Part Number:3157856 || Color:Black || Comfortable Seating:the Dining Chair Is Designed with a Backrest and Armrest to Offer You a Comfortable Seating Experience || Dimensions:63" X 31.5" X 29.1" (L X W X h);22" X 25.2" X 31.5" (W X D X h) || Sturdy and Stable Frame:the Steel Frames Make the Patio Set Sturdy and Stable for Daily Outdoor Use || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Weight:54.55 kg || customization,car parts
HHFDEEW Item Offered:7Ps || Material:Powder-Coated Steel,Tempered Glass;Steel,Polyethylene with a Rattan Look || Armrest Height:25.2" || Part Number:3157856 || Color:Black || Comfortable Seating:the Dining Chair Is Designed with a Backrest and Armrest to Offer You a Comfortable Seating Experience || Dimensions:63" X 31.5" X 29.1" (L X W X h);22" X 25.2" X 31.5" (W X D X h) || Sturdy and Stable Frame:the Steel Frames Make the Patio Set Sturdy and Stable for Daily Outdoor Use || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Weight:54.55 kg || customization,car parts
RvSky 7 Piece Patio Dining Set Black Poly Rattan 25.2"-Armrest Height 3157856,Fit Testing
RvSky Item Offered:7Ps || Material:Powder-Coated Steel,Tempered Glass;Steel,Polyethylene with a Rattan Look || Armrest Height:25.2" || Part Number:3157856 || Color:Black || Comfortable Seating:the Dining Chair Is Designed with a Backrest and Armrest to Offer You a Comfortable Seating Experience || Dimensions:63" X 31.5" X 29.1" (L X W X h);22" X 25.2" X 31.5" (W X D X h) || Sturdy and Stable Frame:the Steel Frames Make the Patio Set Sturdy and Stable for Daily Outdoor Use || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Weight:54.55 kg
RvSky Item Offered:7Ps || Material:Powder-Coated Steel,Tempered Glass;Steel,Polyethylene with a Rattan Look || Armrest Height:25.2" || Part Number:3157856 || Color:Black || Comfortable Seating:the Dining Chair Is Designed with a Backrest and Armrest to Offer You a Comfortable Seating Experience || Dimensions:63" X 31.5" X 29.1" (L X W X h);22" X 25.2" X 31.5" (W X D X h) || Sturdy and Stable Frame:the Steel Frames Make the Patio Set Sturdy and Stable for Daily Outdoor Use || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Weight:54.55 kg
MKUSGQE 7 Piece Patio Dining Set Black Poly Rattan 25.2"-Armrest Height 3157856 Easy to install
MKUSGQE Item Offered:7Ps || Material:Powder-Coated Steel,Tempered Glass;Steel,Polyethylene with a Rattan Look || Armrest Height:25.2" || Part Number:3157856 || Color:Black || Comfortable Seating:the Dining Chair Is Designed with a Backrest and Armrest to Offer You a Comfortable Seating Experience || Dimensions:63" X 31.5" X 29.1" (L X W X h);22" X 25.2" X 31.5" (W X D X h) || Sturdy and Stable Frame:the Steel Frames Make the Patio Set Sturdy and Stable for Daily Outdoor Use || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Weight:54.55 kg || customization,car parts
MKUSGQE Item Offered:7Ps || Material:Powder-Coated Steel,Tempered Glass;Steel,Polyethylene with a Rattan Look || Armrest Height:25.2" || Part Number:3157856 || Color:Black || Comfortable Seating:the Dining Chair Is Designed with a Backrest and Armrest to Offer You a Comfortable Seating Experience || Dimensions:63" X 31.5" X 29.1" (L X W X h);22" X 25.2" X 31.5" (W X D X h) || Sturdy and Stable Frame:the Steel Frames Make the Patio Set Sturdy and Stable for Daily Outdoor Use || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Weight:54.55 kg || customization,car parts
Number on catalog scheme:
6
For full view, you need register
Information:
Length of The Connecting Rod
The connecting rod length (CRL) is the length of the connecting rod. Refer to Table 1 for each grade of length of connecting rod.In order to ensure that the piston height above the cylinder block is correct, three grades of connecting rods "R" to "B" are used during manufacture at the factory. Replacement connecting rods are available in three grades. These grades of connecting rod are "R" to "B". The grade of length is identified by a letter or a color which is marked on the side of the connecting rod. The longest grade is marked with the letter "R". The shortest grade is marked with the letter "B". The difference in length between each grade of connecting rods is the following value: 0.076 mm (0.0030 inch)The grade of length of a connecting rod is determined in the factory by machining an eccentric hole in a semi-finished piston pin bushing. Therefore, the grade of length is determined by the position of the center of the hole in the piston pin bearing. If the connecting rod must be replaced, a new connecting rod assembly must be purchased and installed. Refer to Table 1 for more information. A new piston pin bearing is installed in the new connecting rod at the factory. The bore of the piston pin bearing is reamed to the correct eccentricity.Piston Pin Bearings
Note: This procedure requires personnel with the correct training and the use of specialized equipment for machining.If the piston pin bearing requires replacement but the original connecting rod is not replaced, the following procedures must be performed:
Determine the grade of length of the connecting rod. Use one of the following characteristics:
The mark
The color
Measuring the length
Ensure that the connecting rod is aligned parallel and that the connecting rod is not distorted. Refer to "Distortion of The Connecting Rod" in this service module.
Remove the piston pin bearing from the connecting rod. Install a new bearing in the connecting rod. The new bearing is partially finished. The new bearing must be bored off-center to the correct diameter. This off-center position is determined by the grade of length of the connecting rod. Refer to Table 1. The correct diameter of the bore in the piston pin bearing is given in Specifications , "Connecting Rod". Surface finish of the bored hole in the piston pin bearing ... Ra 0.8 micrometers
Machine the ends of the piston pin bearing to the correct length. Remove any sharp edges. Refer to Specifications, "Connecting Rod".
If the grade of length of the connecting rod is changed, the letter that is stamped on the connecting rod must be removed. Etch a letter that is for the new grade of length on the side of the connecting rod. Note: Do not stamp a new letter on the connecting rod. The force of stamping may damage the connecting rod.Table 1 references the following information: Grade of letter of the connecting rod, the color code of the connecting rods and the lengths of the connecting
The connecting rod length (CRL) is the length of the connecting rod. Refer to Table 1 for each grade of length of connecting rod.In order to ensure that the piston height above the cylinder block is correct, three grades of connecting rods "R" to "B" are used during manufacture at the factory. Replacement connecting rods are available in three grades. These grades of connecting rod are "R" to "B". The grade of length is identified by a letter or a color which is marked on the side of the connecting rod. The longest grade is marked with the letter "R". The shortest grade is marked with the letter "B". The difference in length between each grade of connecting rods is the following value: 0.076 mm (0.0030 inch)The grade of length of a connecting rod is determined in the factory by machining an eccentric hole in a semi-finished piston pin bushing. Therefore, the grade of length is determined by the position of the center of the hole in the piston pin bearing. If the connecting rod must be replaced, a new connecting rod assembly must be purchased and installed. Refer to Table 1 for more information. A new piston pin bearing is installed in the new connecting rod at the factory. The bore of the piston pin bearing is reamed to the correct eccentricity.Piston Pin Bearings
Note: This procedure requires personnel with the correct training and the use of specialized equipment for machining.If the piston pin bearing requires replacement but the original connecting rod is not replaced, the following procedures must be performed:
Determine the grade of length of the connecting rod. Use one of the following characteristics:
The mark
The color
Measuring the length
Ensure that the connecting rod is aligned parallel and that the connecting rod is not distorted. Refer to "Distortion of The Connecting Rod" in this service module.
Remove the piston pin bearing from the connecting rod. Install a new bearing in the connecting rod. The new bearing is partially finished. The new bearing must be bored off-center to the correct diameter. This off-center position is determined by the grade of length of the connecting rod. Refer to Table 1. The correct diameter of the bore in the piston pin bearing is given in Specifications , "Connecting Rod". Surface finish of the bored hole in the piston pin bearing ... Ra 0.8 micrometers
Machine the ends of the piston pin bearing to the correct length. Remove any sharp edges. Refer to Specifications, "Connecting Rod".
If the grade of length of the connecting rod is changed, the letter that is stamped on the connecting rod must be removed. Etch a letter that is for the new grade of length on the side of the connecting rod. Note: Do not stamp a new letter on the connecting rod. The force of stamping may damage the connecting rod.Table 1 references the following information: Grade of letter of the connecting rod, the color code of the connecting rods and the lengths of the connecting
Caterpillar parts catalog:
Parts piston Caterpillar catalog:
24H, 24M, 589, 776C, 776D, 777B, 777D, 777F, 777G, 824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 834B, 834G, 834H, 836, 836G, 836H, 980C, 980F, 980F II, 980G, 980G II, 980...
24H, 24M, 589, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637E, 637G, 824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 834B, 834G, 834H, 836, 836G, 836H, 980C, 980F, 980F II, 98...
5130, 5130B, 5230, 623E, 623F, 623G, 988F, 988F II, D10N, D10R, D10T, D11R, D11T, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD, 365B, 365B II, 554, 621K, 623K, 623K LRC, 627K, 627K LRC, 735, 735B, 740, 740B, 776D, 77...
12H, 140H, 14H, 16H, 330C, 330C FM, 330C L, 330C MH, 621G, 623G, 627G, 631E, 631G, 637E, 637G, 725, 730, 735, 735B, 740, 740B, 844K, 938G, 950G, 990K, 993K, D10N, D10R, D10T, D250E II, D300E II, D350E...
24M, 834B, 834G, 834H, 836, 836G, 836H, 988G, 988H, AD30, D10N, D350E, D350E II, D400, D400E, D44B, D550B, D9L, R2900, R2900G, R3000H
D10N, D10R, D10T, D10T2, D9L
2053257
PISTON
D10T, D10T2
D10T, D10T2
2073673
PISTON
D10T, D10T2
D10T, D10T2
1180609
PISTON AS
D10N, D10R
D10N, D10R
9T7061
PISTON AS
824G, D10N
824G, D10N
D10N, D10R, D10T, D10T2, D9L
9W7039
PISTON-CLUTCH
D10N
D10N
1053668
PISTON
D11N, D11R
D11N, D11R
3G6822
PISTON
D10, D11N
D10, D11N
1229350
PISTON AS
844, 844H, 844K, D9N, D9R, D9T
844, 844H, 844K, D9N, D9R, D9T
6E4495
PISTON AS
D9R
D9R
D9N, D9R
9U9485
PISTON
D9R
D9R
D9N, D9R, D9T
3G8633
PISTON
D10N, D10R, D10T, D9L
D10N, D10R, D10T, D9L