PISTON 3G0808 - Caterpillar

Illustration 1 g02567276
Table 1
Specification for 348-7651 Electric Starting Motor Gp
Item Qty Part Specification Description
1 1 4B-2049 Nut Torque to 3.4 1.2 N m (30.1 10.6 lb in).
2 1 4B-2049 Nut The switch terminal must be insulated with heat shrinkable tubing. Do not use molded terminals.
Torque to 3.4 1.2 N m (30.1 10.6 lb in).
3 3 6V-8188 Nut Torque to 30.5 3.5 N m (269.9 31.0 lb in).
4 1 6V-8188 Nut A maximum of three cable terminals or wire terminals may be used with the battery terminal nut. A maximum of two of the terminals may be equal to or greater than 0 AWG.
Torque to 30.5 3.5 N m (269.9 31.0 lb in).
- - - System voltage is 24 V.
- - - No load performance at 25 °C (77 °F):
Speed 6950 1650 rpm
Current 115 25 amp.
Voltage 23 V
Mount the electric starting motor in a position that places the solenoid assembly no less than the 15 degrees above the horizontal.
When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.