PISTON-POWER 3N5727 - Caterpillar

Assemble turn signal (53) onto mounting bracket (55). Tighten turn signal mounting spacers (61) onto turn signal studs to 12 3 N m (8.85 2.21 lb ft). Tighten turn signal connector wire clip nut (67) and washer to (66) to 12 3 N m (8.85 2.21 lb ft).Note: Flood light mounted with front left blinker assembly.
Illustration 27 g06007520
(52) 383-8634 Flood Lamp Gp
(53) 334-5410 Signal Lamp Gp
(57) 8T-4136 Bolt
(58) 8T-4121 Hard Washer
Install left front blinker and flood lamp assembly onto platform. Use two bolts (57) and two washers (58). Tighten all hardware to 55 10 N m (40.56 7.37 lb ft). Install wiring connector from platform harness.Note: Flood light mounted with front left blinker assembly.
Illustration 28 g06007564
(54) 4E-9924 Cover
(62) 8T-6411 Screw
Install blinker cover (54) using two screws (62). Tighten turn signal cover screws to 12 3 N m (8.85 2.21 lb ft).Note: Flood light mounted with front left blinker assembly.
Illustration 29 g06007424
(52) 383-8634 Flood Lamp Gp
(55) 4E-8975 Bracket
(59) 383–8634-A Flood Lamp Gp Nut
(60) 383-8634-B Flood Lamp Gp Washer
Install light (52) onto bracket (55) using one nut (59) and one washer (60). Tighten all hardware to 55 10 N m (40.56 7.37 lb ft).Note: Flood light mounted with rear left blinker assembly.
Illustration 30 g06007682
(53) 334-5410 Signal Lamp Gp
(55) 4E-8975 Bracket
(61) 230-8152 Spacer
(63) 116-0118 Clip
(66) 8T-4205 Hard Washer
(67) 5C-2890 Nut
Assemble turn signal (53) onto mounting bracket (55). Tighten turn signal mounting spacers (61) onto turn signal studs to 12 3 N m (8.85 2.21 lb ft). Tighten turn signal connector wire clip nut (67) and washer to (66) to 12 3 N m (8.85 2.21 lb ft).Note: Flood light mounted with rear left blinker assembly.
Illustration 31 g06007699
(52) 383-8634 Flood Lamp Gp
(53) 334-5410 Signal Lamp Gp
(57) 8T-4136 Bolt
(58) 8T-4121 Hard Washer
Install left front blinker and flood lamp assembly onto platform. Use two bolts (57) and two washers (58). Tighten all hardware to 55 10 N m (40.56 7.37 lb ft). Install wiring connector from platform harness.Note: Flood light mounted with rear left blinker assembly.
Illustration 32 g06007720
(54) 4E-9924 Cover
(62) 8T-6411 Screw
Install blinker cover (54) using two screws (62). Tighten turn signal cover screws to 12 3 N m (8.85 2.21 lb ft).Note: Flood light mounted with rear left blinker assembly.
Illustration 33 g06007732
(52) 383-8634 Flood Lamp Gp
(56) 101-8418 Bracket
(57) 8T-4136 Bolt
(58) 8T-4121 Hard Washer
(59) 383–8634-A Flood Lamp Gp Nut
(60) 383-8634-B Flood Lamp Gp Washer
Install bracket (56) onto platform assembly. Use two bolts (57) and two washers (58). Mount light (52) onto bracket (56) using nut (59) and washer (60). Tighten all hardware to 55 10 N m (40.56 7.37 lb ft). Install wiring connector from platform harness.Note: Left platform rear flood light.