PISTON 4J7850 - Caterpillar

Illustration 1 g01413720
(1) (3) (7) Apply 7M-7456 Bearing Mount Compound to the wiper seal groove prior to assembly. (2) (5) Lubricate the sealing lips with a small amount of the lubricant that is being sealed. (4) Apply 169-5464 Quick Cure Primer then apply 9S-3263 Thread Lock Compound to the threads of the nut prior to assembly. Tighten the nut to a torque of ... 1600 160 N m (1180 118 lb ft) (6) Install the flat side of the washer toward the rod assembly. (8) Bore of a new cylinder tube ... 114.35 0.10 mm (4.502 0.004 inch) (9) Diameter of a new rod ... 50.75 0.038 mm (1.998 0.0015 inch) (10) Bore of a new cylinder head ... 51.08 0.03 mm (2.011 0.001 inch) (11) Apply 169-5464 Quick Cure Primer then 155-0695 Thread Lock Compound to the threads of the four bolts prior to assembly. Tighten the four bolts to a torque of ... 240 40 N m (180 29 lb ft)