PISTON 5J6202 - Caterpillar

4N4370
Output torque (minimum) ... 70 N m (50 lb ft) with motor at ... 2240 rpmat a pressure of ... 830 kPa (120 psi)(1) Tighten the bolts in steps to a torque of ... 25 to 35 N m (20 to 25 lb ft)(2) Tighten the bolts in steps to a torque of ... 11.3 N m (100 lb in) 7W9655, 7W0301
Minimum inlet pressure ... 620 kPa (90 psi)Maximum inlet pressure ... 1030 kPa (150 psi)(1) Install two 0.10 mm (.004 in) shims opposite each other between the rotor body and the end plate.Tighten retaining nut until there is a slight drag on the shim stock. Tighten the clamping screw in the retaining nut. The clearance between end plate and the rotor can be 0.05 to 0.13 mm (.002 to .005 in).(2) Tighten bolt to a torque of ... 68 N m (50 lb ft)(3) Tighten bolts to a torque of ... 75 N m (55 lb ft)(4) Tighten bolts to a torque of ... 75 N m (55 lb ft)(5) Tighten bolts to a torque of ... 27 N m (20 lb ft)(6) Tighten bolts to a torque of ... 27 N m (20 lb ft)