PISTON & ROD GP 7E0306 - Caterpillar

Install tube (22) .
Illustration 9 g01252344
Connect hose assemblies (21) .
Illustration 10 g01252266
Connect hose (20) . Connect hose assembly (19) .
Illustration 11 g01252265
Connect clips (18) .
Illustration 12 g01252264
Connect cable assemblies (17) .
Illustration 13 g01252263
Install support assembly (15) . Connect harness assemblies (16) .
Illustration 14 g01252251
Illustration 15 g01252252
Position hose (10) on tube assembly (13) and tighten clamps (11) . Connect hose assemblies (12) and (14) .
Illustration 16 g01252236
Connect hose assemblies (9) .
Illustration 17 g01252235
Connect harness assemblies (8) .
Illustration 18 g01252234
Connect hose assembly (7) .
Illustration 19 g01252233
Connect the opposite ends of hose assemblies (6) .
Illustration 20 g01252232
Connect hoses (4) . Connect hose assemblies (5) .
Illustration 21 g01252231
Close access cover (3) and install bolts (2) .
Illustration 22 g01252230
Close valves (1) .
Charge the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.
Fill the cooling system coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Turn the battery disconnect switch to the ON position.End By:
Install the drive shaft. Refer to Disassembly and Assembly, "Drive Shaft - Remove and Install".
Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".
Install the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Install the hoods. Refer to Disassembly and Assembly, "Hood - Remove and Install".