7G7745 PISTON-CLUTCH Caterpillar parts
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992C, 992D, 992G, 992K, 994, 994D, D10, D11N, D11R
Rating:
Alternative (cross code) number:
CA7G7745
7G-7745
7G7745
CA7G7745
7G-7745
7G7745
Weight: 31 pounds 14 kg.
TRACK-TYPE TRACTOR, WHEEL LOADER,
Compatible equipment models: 7G7745:
Number on catalog scheme:
29
For full view, you need register
Information:
The options on the DDT for the Customer Specified Parameters (CSP) can be used for the adjustment of the Governor Setting, the Governor Droop Setting and the High Idle Setting.Governor Selection Procedure
Connect the DDT to the ESS. Display the screen number 32 on the DDT. "GOVERNOR" will be displayed on the top line of the DDT screen number 32 .
Press "ALT1" in order to toggle between "ISOCHRONOUS" and "DROOP" modes.
Press "ENTER" in order to program the ESS with the desired mode.Governor Droop Setting Procedure
Connect the DDT to the ESS. Display the screen number 31 on the DDT. "DROOP SETTING" will be displayed on the top line of the DDT screen number 31 .
Press the "ALT1" key.
Enter the desired percent of the governor droop.
Press the "ENTER" key in order to program the ESS with the desired governor droop.High Idle Setting Procedure
Connect the DDT to the ESS. Display the screen number 30 on the DDT. "ENG HIGH IDLE" will be displayed on the top line of the DDT screen number 30 .Note: The initial setting of the high idle that will be displayed on the DDT screen number 30 will be equivalent to the upper rpm setting that is programmed into the Personality Module.
Press the "ALT1" key.
Enter the desired high idle speed in rpm.
Press the "ENTER" key in order to program the ESS with the desired high idle speed.Use the following procedure in order to adjust the fuel system linkage.
Illustration 1 g00496869
(1) Lever. (2) Rod end. (3) Stop nuts. (4) Adapter. (5) Rod end. (6) Clevis. (7) Gas valve.
Set the gas valve (7) to the closed position by pushing the stem into the valve.
Rotate the actuator shaft until the actuator is in the 2 percent to 4 percent position.
Assemble lever (1) at 40 degrees.
Assemble the adapter (4) against the rod end (5) . Adjust the male rod end (2) to 103.7 1.0 mm (4.08 .04 inch). Attach the lever to the male rod end and attach the clevis to the female rod end.
Rotate clevis (6) until the actuator indicator is 2.0 0.5 degrees from the closed position.
Tighten the stop nuts (3) against the adapters.
Connect the DDT to the ESS. Display the screen number 32 on the DDT. "GOVERNOR" will be displayed on the top line of the DDT screen number 32 .
Press "ALT1" in order to toggle between "ISOCHRONOUS" and "DROOP" modes.
Press "ENTER" in order to program the ESS with the desired mode.Governor Droop Setting Procedure
Connect the DDT to the ESS. Display the screen number 31 on the DDT. "DROOP SETTING" will be displayed on the top line of the DDT screen number 31 .
Press the "ALT1" key.
Enter the desired percent of the governor droop.
Press the "ENTER" key in order to program the ESS with the desired governor droop.High Idle Setting Procedure
Connect the DDT to the ESS. Display the screen number 30 on the DDT. "ENG HIGH IDLE" will be displayed on the top line of the DDT screen number 30 .Note: The initial setting of the high idle that will be displayed on the DDT screen number 30 will be equivalent to the upper rpm setting that is programmed into the Personality Module.
Press the "ALT1" key.
Enter the desired high idle speed in rpm.
Press the "ENTER" key in order to program the ESS with the desired high idle speed.Use the following procedure in order to adjust the fuel system linkage.
Illustration 1 g00496869
(1) Lever. (2) Rod end. (3) Stop nuts. (4) Adapter. (5) Rod end. (6) Clevis. (7) Gas valve.
Set the gas valve (7) to the closed position by pushing the stem into the valve.
Rotate the actuator shaft until the actuator is in the 2 percent to 4 percent position.
Assemble lever (1) at 40 degrees.
Assemble the adapter (4) against the rod end (5) . Adjust the male rod end (2) to 103.7 1.0 mm (4.08 .04 inch). Attach the lever to the male rod end and attach the clevis to the female rod end.
Rotate clevis (6) until the actuator indicator is 2.0 0.5 degrees from the closed position.
Tighten the stop nuts (3) against the adapters.
Cat SIS web machinery list:
Parts piston Caterpillar catalog:
5130, 5130B, 5230, 623E, 623F, 623G, 988F, 988F II, D10N, D10R, D10T, D11R, D11T, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N
854G, 992G, D6H, D6H XL, D6R, D6R II, D7R II
583T, 797, 844H, 990H, D11R, D11T, D8R, D8R II, D8T, D9R, D9T, PL83
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD, 365B, 365B II, 554, 621K, 623K, 623K LRC, 627K, 627K LRC, 735, 735B, 740, 740B, 776D, 77...
12H, 140H, 14H, 16H, 330C, 330C FM, 330C L, 330C MH, 621G, 623G, 627G, 631E, 631G, 637E, 637G, 725, 730, 735, 735B, 740, 740B, 844K, 938G, 950G, 990K, 993K, D10N, D10R, D10T, D250E II, D300E II, D350E...
834B, 836, 988F, 988F II, 992C, 992D
824B, 825B, 834, 834B, 972G, 980G, 980G II, 988, 988B, 992, 992C, 992D, D44B, D550B
795F AC, 795F XQ, 797, 797B, 797F, 950G, 950G II, 962G, 962G II, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, 972G II, 992C, 992D, R1300, R1300G, R1300G II, R1600
24H, 24M, 69D, 735, 740, 769C, 769D, 770, 771C, 771D, 772, 773B, 773D, 773E, 773F, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G LRC, 775G OEM, 834G, 834H, 836G, 836H, 844, 844H, 988F II, 988G, 988...
24H, 24M, 69D, 735, 740, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777, 777D, 784B, 784C, 785, 785B, 785C, 789, 789B, 789C, 793B, 793C, 797, 824C, 980C, 980F, 980F ...
992C, D8L, D9L
797, 834G, 834H, 836G, 836H, 844K, 854K, 988G, 988H, 990K, 992K, 993K, D8T, D9T
7G7742
PISTON-CLUTCH
992C, 992D, 992G, D10, D11N, D11R
992C, 992D, 992G, D10, D11N, D11R
834B, 836, 988B, 992C, 994
4V6700
PISTON
992C
992C
3522059
PISTON
966K, 966M, 966M XE, 972K, 972M, 972M XE
966K, 966M, 966M XE, 972K, 972M, 972M XE
950H, 962H, 966H, 966K, 966M, 966M XE, 972H, 972K, 972M, 972M XE
4E8583
PISTON
834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 844, 854G, 980H, 980K, 986H, 988F, 988F II, 988G, 988H, 988K, 990, 990 II, 992G
834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 844, 854G, 980H, 980K, 986H, 988F, 988F II, 988G, 988H, 988K, 990, 990 II, 992G
992C, 992D
772, 773, 992, 992C
2P5752
PISTON-LOAD
988, 988B, 988F, 988F II, 992, 992C, 992D
988, 988B, 988F, 988F II, 992, 992C, 992D
834B, 992, 992C
6Y5877
PISTON-CLUTCH
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992C, 992D, 992G, 992K, 993K, 994, 994D, 994F, 994H, D11R, D11T
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992C, 992D, 992G, 992K, 993K, 994, 994D, 994F, 994H, D11R, D11T
3P7473
PISTON-CLUTCH
992C, D10, D11N, D11R
992C, D10, D11N, D11R