AVSPARE.COM
parts catalog

PISTON AS 7I1083 - Caterpillar


7I1083 PISTON AS Caterpillar parts 312
Rating:
59
Alternative (cross code) number:
CA7I1083
7I-1083
7I1083
Caterpillar 7I1083 PISTON AS
Weight: 0.11 pounds 0 kg.

Buy PISTON AS 7I1083 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 7I1083:

EXCAVATOR  312   Caterpillar
Number on catalog scheme: 1
  For full view, you need register

Information:


Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: This machine is equipped with a pilot hydraulic system.This section provides probable causes to a known problem. Since there may be several probable causes, specific inspections or specific instrument tests may be recommended. These inspections and tests will help to identify the cause that is most probable.The following is a list of some pertinent terms and the definitions of those terms.Collapse - The sudden drop of a cylinder during normal operationDrift - Slow motion of the implement cylinders while the blade control lever is in the HOLD position.Droop - Hydraulic cylinders move initially in the direction that is opposite of the direction that is commanded by the operator. The cylinders then move in the correct direction.Possible problem list for the hydraulic systemThe implement pump makes noise and the cylinder rods do not move evenly. There are also air bubbles in the oil.Probable causes
The viscosity of the oil is incorrect.
The main relief valve opens at low oil pressure.
There is a loose connection of the suction line on the inlet side of the implement pump.
The implement pump has too much wear. The oil temperature is too high.Probable causes
The machine is being operated above the intended capacity or in ambient temperatures that are too high for the machine's design.
The viscosity of the oil is incorrect.
The setting of one or both of the implement relief valves is too low.
The implement pump has too much wear.
There is a restriction in an hydraulic oil passage.
There is a leak in one or more circuits.
The hydraulic oil level is low.
The hydraulic oil is contaminated.
The air flow through the hydraulic oil cooler is too low.
The oil flow through the hydraulic oil cooler is too low.
There is air in the hydraulic oil. Note: A problem with air in the hydraulic oil must be corrected before the hydraulic system will operate at normal temperatures. There are two conditions that cause air to be in the hydraulic oil:
Return oil is flowing into the hydraulic oil tank above the level of oil that is in the tank.
There are leaks in the oil suction line between the implement pump and the hydraulic oil tank.
The hydraulic oil temperature sensor is faulty. The output of the implement pump is low.Probable causes
The oil level is low.
The viscosity of the oil is incorrect.
The implement pump has too much wear.
The setting of one or both of the implement relief valves is too low.
There is a restriction in the supply line.
The setting of the pilot relief valve is too low. The oil pressure is low.Probable causes
One or both of the implement relief valves opens at low oil

Caterpillar parts catalog:

Caterpillar parts catalog
312 Excavator 6BL00001-UP (MACHINE) POWERED BY 3054 Engine


Parts piston Caterpillar catalog:

1089620 PISTON & ROD GP
3054, 312, 315, 317, 416B, 416C, 426B, 426C, 428B, 428C, 436B, 436C, 438B, 438C, CB-534B, CB-534C, CB-535B, CP-433C, CS-431C
1105403 PISTON
3054, 3056, 307, 312, 416B, 416C, 426B, 426C, 428B, 428C, 436B, 436C, 438B, 438C, AP-800C, BG-225B, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, PS-150B, PS-...
1072553 PISTON AS
3054, 3056, 312, 315, 317, 416B, 416C, 426C, 428B, 428C, 436C, 438C, AP-800C, BG-225B, CB-534B, CB-534C, CB-535B, CP-433C, CS-431C
1168633 PISTON
3054, 3056, 312, AP-800C, BG-225B, CB-534B, CB-534C, CB-535B, CP-433C, CS-431C, PS-200B, PS-300B, TH103, TH62, TH63, TH82, TH83
0874676 PISTON
307, 307B, 311, 312, 315, 317, 320 L, 320B, 322 FM L, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330 L, 330B L, 345B II, 345B L, 345C L, 350, 350 L, 365B, 365B II, 365C, 365C L, 365C L MH, 375, 375 L,...
7Y1687 PISTON AS
311, 311B, 312, 315, 317, 320 L, OEMS
0860560 PISTON
311, 311B, 312, 312B, 312B L, 313B, E110B, E120B
0990326 PISTON AS
311, 312, D7G, E110B, E120B
1R5698 PISTON
311, 312, 320 L, 325, 325 L, 325 LN, 330, 330 FM L, 350, 375, 375 L, 5080, E200B
5I8791 PISTON-COMPENSATOR
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN, 318B, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L,...
0997196 PISTON-BRAKE
311, 311B, 312, 312B, 315, 315B, 315B FM L, 317, E110B, OEMS
1251551 PISTON
307B, 307C, 307D, 308C, 308D, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 314C, 314D CR, 314D LCR, 315C, 315D L
1251550 PISTON
311, 311B, 312, 312B, 312B L, 312C L
8U9165 PISTON
312, 312B L, 315, 317
7I7185 PISTON
308C, 311, 312, 315, 317, 320B, 320N, 325, 325 L, 325B L
0860560 PISTON
311, 311B, 312, 312B, 312B L, 313B, E110B, E120B
7I1121 PISTON AS
312, 312B, 313B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.