7I2330 PISTON AS Caterpillar parts
307, 307B, E70B
Rating:
Alternative (cross code) number:
CA7I2330
7I-2330
7I2330
CA7I2330
7I-2330
7I2330
Weight: 1 pounds 0 kg.
EXCAVATOR, MINI HYD EXCAVATOR,
Number on catalog scheme:
31
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the fan and the fan pulley. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Loosen the hose clamps and remove the hose from the water pump inlet.
Illustration 1 g02164768
Remove bolts (4).
Remove water pump (3) from front cover (1). Note: If necessary, tap the water pump with a soft faced hammer in order to loosen the water pump.
Remove gasket (2).
Start By:
Remove the fan and the fan pulley. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Loosen the hose clamps and remove the hose from the water pump inlet.
Illustration 1 g02164768
Remove bolts (4).
Remove water pump (3) from front cover (1). Note: If necessary, tap the water pump with a soft faced hammer in order to loosen the water pump.
Remove gasket (2).
Caterpillar parts catalog:
Parts piston Caterpillar catalog:
3054, 3056, 307, 416B, 416C, 428B, 428C, CB-434B, CB-434C, CB-544, CB-545, CP-433C, CS-323C, CS-431C, PS-150B, TH62, TH63, TH82
307, 307B, E70, E70B, PM-465
303, 303.5C, 303C CR, 304, 304C CR, 305, 305.5, 305.5E, 305C CR, 306, 306E, 307B, 307C, 308C, 311B, 311C, 312B, 312C, 312C L, 313B, 314C, 315C, 318B, 318C, 319C, 320C, 320C FM, 320C L, 320D, 320D LRR,...
0855530
PISTON
E70B
E70B
0855580
PISTON
E70B
E70B
0855581
PISTON B
E70B
E70B
0855582
PISTON A
E70B
E70B
0855587
PISTON
E70B
E70B
5I9035
PISTON
E70B
E70B
5I9170
PISTON
E70B
E70B
5I9321
PISTON
E70B
E70B
0996985
PISTON
E70B
E70B
0966800
PISTON-BRAKE
307, 307B, E70, E70B
307, 307B, E70, E70B
1593190
PISTON
M312, M313C, M313D, M315D 2
M312, M313C, M313D, M315D 2
1307838
PISTON
M312
M312
1307834
PISTON
M312
M312
1314677
PISTON
M312
M312
1314676
PISTON
980K, 980K HLG, 980M, 982M, D10N, D10R, D6R, D6R II, D6R III, D6R STD, M312
980K, 980K HLG, 980M, 982M, D10N, D10R, D6R, D6R II, D6R III, D6R STD, M312
1038332
PISTON
307, 307B, 307C, 307D, 308C, 308D, 324D L, 325D MH, 330D, 330D L, 330D MH, 345C, 345C MH, M325D L MH, M325D MH, M330D
307, 307B, 307C, 307D, 308C, 308D, 324D L, 325D MH, 330D, 330D L, 330D MH, 345C, 345C MH, M325D L MH, M325D MH, M330D
1057478
PISTON
307, 307B, 307C, 308D
307, 307B, 307C, 308D
307, 307B, 307C, 307D, 308C, 308D, 312C L
1038205
PISTON
307, 307B, 307C, 307D, 308C, 308D
307, 307B, 307C, 307D, 308C, 308D
0931580
PISTON
307, E70, E70B
307, E70, E70B
307, 307B, E70, E70B, PM-465