PISTON 7J1727 - Caterpillar

Settings
Illustration 1 g06258784
(1) Settings IconThe settings icon (1) allows the user to access the menu of items that are available for configuring and adjusting. The following screens are available in the General Settings Menu:
English or Metric Unit Selection
Brightness Level Adjustment
Set Time and Date
Technician Login
Display IP Configuration
Debug Log
Electronic High Idle Switch
Modbus Output Toggle
Day/Night Mode Selection
Access to Engine Configuration Settings
Access to Engine Monitoring System Settings
Snapshots
HistogramsUse the arrow keys to navigate between display screens for more information about engine or module serial numbers and installed software part numbers.
Engine Information
HMI Display InformationTechnician Login
The technician login Icon will allow the user access to the following:
Configurable Settings
Programmable Engine Monitoring Settings
Service Tests
Illustration 2 g06258821The user may change the Technician Login username and password. Default username and passwords are:
Login: Technician
Password: 1800228After the Technician Login information and password is accepted, the ability to configure HMI settings will become available.
Illustration 3 g06258824Display IP
The Display IP Configuration Icon allows the user to configure the TCP/IP Modbus IP slave address.Debug Log
The Debug Login Icon allows for the user to download error logs to help aid in troubleshooting of the display software.Configuration
The Configuration icon provides information found within the Engine ECM configuration settings.
Timing Control
Speed Control
Gaseous Fuel Parameters
Compressor Control
Governor Gain Parameters
Engine State Control 1
Engine State Control 2
Monitoring ParametersMonitor System
The Monitoring System Icon allows the user to view the settings found within the Engine ECM’s monitoring system settings. The Engine Monitoring System interface allows the user to navigate between various monitoring system parameters and make adjustments to the set points if allowed. Some set points may be changed in accordance with the engine software operating requirements. Other monitoring system parameters may be non-configurable and for viewing only. Within this menu you may find:
System Voltage
Oil Filter Differential Pressure
Engine Oil to Engine Coolant Differential Pressure
Engine Oil Temperature
Engine Coolant Temperature
Air Inlet #1 Differential Pressure
Exhaust Port Deviation
Exhaust Port Temperature
Turbine Inlet Temperature
Aftertreatment Catalytic Convertor Differential Gas Temperature
Aftertreatment Catalytic Convertor Intake Gas Temperature
Aftertreatment Catalytic Convertor Outlet Gas Temperature
Engine Ignition Transformer Secondary Output
IMAP
IMAT
Engine Oil Pressure
Engine Overspeed
Illustration 4 g06258851
Illustration 5 g06258853