PISTON ASSEM 7S3163 - Caterpillar

Illustration 1 g03266520
Right side view of engine
Illustration 2 g03266522
Rear view of engine
Table 1
Specification for 200-6420 Engine Oil Filter Gp, 209-3427 Engine Oil Filter Gp and 236-5198 Engine Oil Filter Gp
Item Qty Part Specification Description
1 2 7N-7697 Plunger Cooling jet sequence valves must start to open at a pressure difference of 130 30 kPa (19 4 psi).
Cooling jet sequence valves must be fully open at a pressure difference of 200 30 kPa (29 4 psi).
2 2 6B-9202 Spring Length under test force is 68.3 mm (2.69 inch).
Test force is 85.0 to 100.0 N (19.0 to 22.4 lb).
Free length after test is 112.8 mm (4.44 inch).
3 1 2W-1053 Plug Torque to 100 15 N m (74 11 lb ft).
4 4 109-2332 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
5 4 275-2604 Engine Oil Filter Tighten the engine oil filter element onto the mounting base until the sealing surface contacts the base. Then tighten the engine oil filter element for an additional one full turn.
6 4 7G-6713 Spring Length under test force is 57.2 mm (2.25 inch).
Test force is 109 5 N (25 1 lb).
Free length after test is 99.7 mm (3.93 inch).
7 4 1P-1367 Plunger Bypass valve must start to open at a pressure difference of 203 20 kPa (29 3 psi).
The plunger must move freely in the bore.