7T4205 PISTON Caterpillar parts
D8N, IT18B
Rating:
Alternative (cross code) number:
CA7T4205
7T-4205
7T4205
CA7T4205
7T-4205
7T4205
Weight: 36 pounds 16 kg.
INTEGRATED TOOLCARRIER, TRACK-TYPE TRACTOR,
Compatible equipment models: 7T4205:
Information:
Removal Procedure
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the cooling system pressure cap is cool enough to touch with your bare hand.Remove the cooling system pressure cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Plug the hoses and cover the openings in order to prevent contamination of the system.
Drain the coolant into a suitable container for storage or for disposal.
Open the engine enclosure on the left side.
Illustration 1 g00608374
Loosen two clamps (1). Disconnect hose (2) from housing (4) .
Remove four bolts (3), the washers, and housing (4) from the machine.
Illustration 2 g00608451
Remove the water temperature regulator from the cylinder head.Installation Procedure
Illustration 3 g00608451
Install the water temperature regulator on the cylinder head.
Illustration 4 g00608374
Install housing (4) on the water temperature regulator. Install four bolts (3) and the washers.
Install hose (2) in housing (4). Tighten two clamps (1) .
Close the engine enclosure on the left side.
Refill the radiator with coolant to the correct level.Reference: Refer to Operation and Maintenance Manual, "Lubricant Viscosities and Fluid Capacities" for your machine.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the cooling system pressure cap is cool enough to touch with your bare hand.Remove the cooling system pressure cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Plug the hoses and cover the openings in order to prevent contamination of the system.
Drain the coolant into a suitable container for storage or for disposal.
Open the engine enclosure on the left side.
Illustration 1 g00608374
Loosen two clamps (1). Disconnect hose (2) from housing (4) .
Remove four bolts (3), the washers, and housing (4) from the machine.
Illustration 2 g00608451
Remove the water temperature regulator from the cylinder head.Installation Procedure
Illustration 3 g00608451
Install the water temperature regulator on the cylinder head.
Illustration 4 g00608374
Install housing (4) on the water temperature regulator. Install four bolts (3) and the washers.
Install hose (2) in housing (4). Tighten two clamps (1) .
Close the engine enclosure on the left side.
Refill the radiator with coolant to the correct level.Reference: Refer to Operation and Maintenance Manual, "Lubricant Viscosities and Fluid Capacities" for your machine.
Caterpillar parts catalog:
Parts piston Caterpillar catalog:
7G7724
PISTON-CLUTCH
30/30, 572R, 572R II, 578, 583R, 587R, 611, 615, 615C, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, 972G II, 972H, 972K, 972M, 980C, 980F, 9...
30/30, 572R, 572R II, 578, 583R, 587R, 611, 615, 615C, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, 972G II, 972H, 972K, 972M, 980C, 980F, 9...
8P9507
PISTON-CLUTCH
30/30, 572R, 572R II, 578, 583R, 587R, 611, 615, 615C, 814B, 814F, 815B, 815F, 816F, 966D, 966F, 966F II, 970F, 980C, 980F, 980F II, 980G, 980G II, 980H, D250B, D250E, D250E II, D25C, D25D, D300B, D30...
30/30, 572R, 572R II, 578, 583R, 587R, 611, 615, 615C, 814B, 814F, 815B, 815F, 816F, 966D, 966F, 966F II, 970F, 980C, 980F, 980F II, 980G, 980G II, 980H, D250B, D250E, D250E II, D25C, D25D, D300B, D30...
8P1892
PISTON-CLUTCH
572R, 572R II, 578, 583R, 587R, 814B, 814F, 815B, 815F, 816F, 966D, 966F, 966F II, 970F, 980C, 980F, 980F II, 980G, 980G II, 980H, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D7H, D7R, D7...
572R, 572R II, 578, 583R, 587R, 814B, 814F, 815B, 815F, 816F, 966D, 966F, 966F II, 970F, 980C, 980F, 980F II, 980G, 980G II, 980H, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D7H, D7R, D7...
8E1707
PISTON
D6H, D7H, D8N
D6H, D7H, D8N
1656969
PISTON AS
5130, 5130B, 5230, 623E, 623F, 623G, 988F, 988F II, D10N, D10R, D10T, D11R, D11T, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N
5130, 5130B, 5230, 623E, 623F, 623G, 988F, 988F II, D10N, D10R, D10T, D11R, D11T, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N
9T8229
PISTON AS
D6R, D6R II, D7R, D7R II, D8N
D6R, D6R II, D7R, D7R II, D8N
9T4180
PISTON
572R, D7H, D7R, D8N
572R, D7H, D7R, D8N
9T4179
PISTON-ACTUATOR
330C L, 572R, D7H, D7R, D8N
330C L, 572R, D7H, D7R, D8N
9T4184
PISTON-ACTUATOR
572R, D7H, D7R, D8N
572R, D7H, D7R, D8N
9W6186
PISTON-CLUTCH
587R, D8N, D8R, D8R II
587R, D8N, D8R, D8R II
1U2716
PISTON
8D, D8N, D8R, D8R II, D8T
8D, D8N, D8R, D8R II, D8T
7T3566
PISTON
D6H, D7H, D8N
D6H, D7H, D8N
8E3026
PISTON-LOAD
824G, 825G, 826C, 826G, 834B, 836, 844K, 854G, 854K, 936F, 966F, 980C, 980F, 980F II, 980G, 980G II, 988B, 990K, 992G, 992K, 993K, 994, AD30, D10N, D10R, D350E, D350E II, D400E, D8N, G936
824G, 825G, 826C, 826G, 834B, 836, 844K, 854G, 854K, 936F, 966F, 980C, 980F, 980F II, 980G, 980G II, 988B, 990K, 992G, 992K, 993K, 994, AD30, D10N, D10R, D350E, D350E II, D400E, D8N, G936
1J2676
PISTON
8A, D9G
8A, D9G
3W8360
PISTON AS
943
943
2K4009
PISTON
933, 955C, 977D, 977H
933, 955C, 977D, 977H
3T6792
PISTON-CLUTCH
916, 926, 926A, D4B, D4H, IT18B, IT28, IT28B
916, 926, 926A, D4B, D4H, IT18B, IT28, IT28B
6E4408
PISTON-ACTUATOR
D8N, D8R
D8N, D8R
9T8452
PISTON
14G, 14H, 14H NA, 14M, 16G, 16H, 16H NA, 16M, 24H, 24M, 5230, 5230B, 789B, 789C, 789D, 793, 793B, 793C, D8N, D8R, D8R II, D9R
14G, 14H, 14H NA, 14M, 16G, 16H, 16H NA, 16M, 24H, 24M, 5230, 5230B, 789B, 789C, 789D, 793, 793B, 793C, D8N, D8R, D8R II, D9R
1J5239
PISTON
Caterpillar
Caterpillar
6E1183
PISTON
D8N, D8R, D8R II, D8T
D8N, D8R, D8R II, D8T