PISTON 9H5233 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance.Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.Note: If Cat HYDO Advanced 10 hydraulic oil is used, the hydraulic oil change interval will change. The normal interval of 2000 hours is extended to 3000 hours. S O S services may extend the oil change longer. Consult your Caterpillar dealer for details.When Required
Battery - Replace
Battery or Battery Cable - Disconnect
Breather (Transmission Tank) - Clean
Coolant Sample (Level 1) - Obtain
Coolant Sample (Level 2) - Obtain
Engine - Clean
Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
Engine Oil Level Gauge - Calibrate
Engine Storage Procedure - Check
Fuel System - Prime
Fuel Tank Water and Sediment - Drain
Daily
Coolant Level - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Oil Level - Check
Fuel Tank Water and Sediment - Drain
Torque Converter and Transmission Oil Level - Check
Walk-Around Inspection
Initial 100 Service Hours
Oil Filter (Transmission) - Replace
Oil Filter (Transmission) - Replace
PM Level 1 - Every 48 000 km (30 000 miles) or 15 520 L (4100 US gal) of Fuel or 500 Service Hours
Alternator - Inspect
Battery Electrolyte Level - Check
Belts - Inspect/Adjust/Replace
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
Fuel System Secondary Filter - Replace
Fuel Tank Water and Sediment - Drain
Grounding Stud - Inspect/Clean/Tighten
Hoses and Clamps - Inspect/Replace
Initial 250 Service Hours
Oil Filter (Transmission) - Replace
Every 250 Service Hours
Air Shutoff - Test
Battery Electrolyte Level - Check
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil and Filter - Change
Starting Motor - Inspect
Torque Converter and Transmission Oil Sample - Obtain
Every 500 Service Hours
Alternator - Inspect
Belts - Inspect/Adjust/Replace
Fuel System Primary Filter - Replace
Oil Filter (Transmission) - Replace
Turbocharger - Inspect
Water Pump - Inspect
Every 500 Service Hours or 6 Months
Breather (Transmission Tank) - Clean
Oil Filter (Transmission) - Replace
Oil Filter (Transmission) - Replace
Torque Converter and Transmission Oil - Change
Every 80 500 km (50 000 miles) or 1500 Service Hours
ARD Spark Plug - Inspect/Replace
Fumes Disposal Filter Element - Replace
Every 1500 Service Hours