9J2416 PISTON ASSEM. Caterpillar parts
943
Rating:
Alternative (cross code) number:
CA9J2416
9J-2416
9J2416
CA9J2416
9J-2416
9J2416
Weight: 0.03 pounds 0 kg.
TRACK LOADER,
Compatible equipment models: 9J2416:
Number on catalog scheme:
11
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Remove the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Illustration 1 g02048773
Typical example
Make a temporary mark on idler pulley (2) in order to identify the correct orientation and the position.
Loosen bolt (1) and remove idler pulley (2) from bracket. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02048794
Typical example
Ensure that all components of the idler pulley are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Position idler pulley (2) on the bracket. Tighten bolt (1) hand tight.
Tighten the bolt to a torque of 44 N m (32 lb ft).
Rotate the pulley in order to ensure that the pulley rotates freely. End By:
Install alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Remove the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Illustration 1 g02048773
Typical example
Make a temporary mark on idler pulley (2) in order to identify the correct orientation and the position.
Loosen bolt (1) and remove idler pulley (2) from bracket. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02048794
Typical example
Ensure that all components of the idler pulley are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Position idler pulley (2) on the bracket. Tighten bolt (1) hand tight.
Tighten the bolt to a torque of 44 N m (32 lb ft).
Rotate the pulley in order to ensure that the pulley rotates freely. End By:
Install alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Caterpillar parts catalog:
Parts piston Caterpillar catalog:
12G, 130G, 140G, 16G, 3S, 518, 518C, 613C, 65, 815B, 815F, 815F II, 910, 920, 931, 931B, 931C, 931C II, 933, 933C, 939, 939C, 943, 950, 953, 953C, 953D, 966D, 966F, D3B, D3C II, D3C III, D4C III, D4H,...
215, 235, 3204, 3306, 815B, 936, 943, 953, 963, D3C II, D4HTSK II, E180
920, 941, 943, 951B, 953
7P6549
PISTON
943, 953
943, 953
9J9404
PISTON ASSEM.
943, 953, 953B
943, 953, 953B
9J9789
PISTON
943
943
9J8743
PISTON
943, 953, 963, 973
943, 953, 963, 973
8G6277
PISTON AS
943, 963
943, 963
8G7079
PISTON
943, 953, 953B
943, 953, 953B
8G5934
PISTON AS
943
943
7P6549
PISTON
943, 953
943, 953
3G9939
PISTON
571G, 816
571G, 816
8G3739
PISTON ASSEM.
943, 963
943, 963
1U1808
PISTON
10, 8D, D10, D10N, D11N, D8L, D9L
10, 8D, D10, D10N, D11N, D8L, D9L
9J5528
PISTON
963, 973
963, 973
814, 815, 950, 955K, 955L, 966C, D5, D5B
7J4083
PISTON
854G, 966D, 966F, 966F II, 966G, 972G, D10N, D10R, D10T, D9H, D9L
854G, 966D, 966F, 966F II, 966G, 972G, D10N, D10R, D10T, D9H, D9L
953, D3
1W5794
PISTON-BODY
953, D3
953, D3
9J8727
PISTON ASSEM.
953, 963
953, 963
9G5078
PISTON
561D
561D
9G9020
PISTON
983B
983B