9N5251 PISTON GROUP Caterpillar parts
1673C, 3304, 3306, 571G, D7G
Rating:
Alternative (cross code) number:
CA9N5251
9N-5251
9N5251
CA9N5251
9N-5251
9N5251
Weight: 589 pounds 267 kg.
GEN SET ENGINE, TRUCK ENGINE,
Cross Reference:
AE
900207 STD,
CATERPILLAR
1P 0239,
2P 6270,
2P 6271,
2P 6272,
3Y 0651,
4N 9258,
7S 6791,
9N 1303,
9N 5250,
9N 5251,
9N 5404,
KOLBENSCHMIDT
083027,
120127,
MAHLE ORIGINAL
127 58 00,
SCHÖTTLE
80-0914-00,
TRW
175-9948,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
RAParts Heavy Duty Tractor Exhaust Manifold Muffler Pipe Clamp Fits Ford 8N 9N 2N
Reliable Aftermarket Parts One New Aftermarket Muffler Clamp Kit || Kit Includes: 2 High Strength Aluminum Clamps (9N5251), 2 Nuts (33825S), 2 Bolts (304777S8), 2 Lock Washers (34806S36) || Diameter - 1 11/16" - 2 3/8", Thread Size - 5/16" || Fits Ford/New Holland Models 2N, 8N, 9N. Fits Massey Ferguson Models 135, 35, TE20, TO20, TO30 || Replaces Part Numbers: CAPN5200A, 181461M1, 235443, 1117-8100, S.60654
Reliable Aftermarket Parts One New Aftermarket Muffler Clamp Kit || Kit Includes: 2 High Strength Aluminum Clamps (9N5251), 2 Nuts (33825S), 2 Bolts (304777S8), 2 Lock Washers (34806S36) || Diameter - 1 11/16" - 2 3/8", Thread Size - 5/16" || Fits Ford/New Holland Models 2N, 8N, 9N. Fits Massey Ferguson Models 135, 35, TE20, TO20, TO30 || Replaces Part Numbers: CAPN5200A, 181461M1, 235443, 1117-8100, S.60654
RAParts Heavy Duty Tractor Exhaust Manifold Muffler Pipe Clamp Fits Ford 8N 9N 2N
Reliable Aftermarket Parts One New Aftermarket Muffler Clamp Kit || Kit Includes: 2 High Strength Aluminum Clamps (9N5251), 2 Nuts (33825S), 2 Bolts (304777S8), 2 Lock Washers (34806S36) || Diameter - 1 11/16" - 2 3/8", Thread Size - 5/16" || Fits Ford/New Holland Models 2N, 8N, 9N. Fits Massey Ferguson Models 135, 35, TE20, TO20, TO30 || Replaces Part Numbers: CAPN5200A, 181461M1, 235443, 1117-8100, S.60654
Reliable Aftermarket Parts One New Aftermarket Muffler Clamp Kit || Kit Includes: 2 High Strength Aluminum Clamps (9N5251), 2 Nuts (33825S), 2 Bolts (304777S8), 2 Lock Washers (34806S36) || Diameter - 1 11/16" - 2 3/8", Thread Size - 5/16" || Fits Ford/New Holland Models 2N, 8N, 9N. Fits Massey Ferguson Models 135, 35, TE20, TO20, TO30 || Replaces Part Numbers: CAPN5200A, 181461M1, 235443, 1117-8100, S.60654
RAParts Heavy Duty Tractor Exhaust Manifold Muffler Pipe Clamp Fits Ford 8N 9N 2N
Reliable Aftermarket Parts One New Aftermarket Muffler Clamp Kit || Kit Includes: 2 High Strength Aluminum Clamps (9N5251), 2 Nuts (33825S), 2 Bolts (304777S8), 2 Lock Washers (34806S36) || Diameter - 1 11/16" - 2 3/8", Thread Size - 5/16" || Fits Ford/New Holland Models 2N, 8N, 9N. Fits Massey Ferguson Models 135, 35, TE20, TO20, TO30 || Replaces Part Numbers: CAPN5200A, 181461M1, 235443, 1117-8100, S.60654
Reliable Aftermarket Parts One New Aftermarket Muffler Clamp Kit || Kit Includes: 2 High Strength Aluminum Clamps (9N5251), 2 Nuts (33825S), 2 Bolts (304777S8), 2 Lock Washers (34806S36) || Diameter - 1 11/16" - 2 3/8", Thread Size - 5/16" || Fits Ford/New Holland Models 2N, 8N, 9N. Fits Massey Ferguson Models 135, 35, TE20, TO20, TO30 || Replaces Part Numbers: CAPN5200A, 181461M1, 235443, 1117-8100, S.60654
Number on catalog scheme:
6
For full view, you need register
Compatible equipment models: 9N5251:
Information:
Before lifting the machine, ensure that suitable lifting equipment is available and that the personnel are familiar with lifting work. The weight of the machine is shown on the rating plate, on the dimension drawing, and the packing list.While conducting any motor lifting operations, the following points must be observed:
Use only the lifting lugs or eyes intended for lifting the complete motor. Do not use any small additional lifting lugs or eyes available, as those lugs or eyes are only for service purposes.
The center of gravity of machines with the same frame may vary due to different outputs, mounting arrangements, and auxiliary equipment.
Check that eyebolts or the lifting lugs integrated with the machine frame are undamaged before lifting. Damaged lifting lugs must not be used.
Lifting eyebolts must be tightened before lifting. If needed, the position of the eyebolt must be adjusted with suitable washers.
Improper lift rigging can allow unit to tumble causing injury and damage.
Note: Do not lift the complete generating set by the generator lifting points.Unpack the equipment with care in order to avoid scratching painted surfaces. Move the unit to the mounting location. The unit can be moved by either of the following methods:
Attach an overhead crane to the eyebolts that are installed on the generator frame.
Use a lift truck in order to lift the generator.The hoist and the hoist cables should have a rating greater than the weight of the generator.Note: The machine weight can be found on the rating plate, dimension drawing, and the packing list.
Illustration 1 g06167175
Lifting the generator
Illustration 2 g06167182
Lifting the generator
Ensure that the machine is lifted from its frame. Do not lift the machine from the top cover.Always keep the generator in the horizontal position during lifting. Keeping the generator horizontal will reduce the risk of the rotor falling out if a single-bearing design.Note: A machine mounted on a pallet should be lifted by crane from the lifting eyes of the machine.
Use only the lifting lugs or eyes intended for lifting the complete motor. Do not use any small additional lifting lugs or eyes available, as those lugs or eyes are only for service purposes.
The center of gravity of machines with the same frame may vary due to different outputs, mounting arrangements, and auxiliary equipment.
Check that eyebolts or the lifting lugs integrated with the machine frame are undamaged before lifting. Damaged lifting lugs must not be used.
Lifting eyebolts must be tightened before lifting. If needed, the position of the eyebolt must be adjusted with suitable washers.
Improper lift rigging can allow unit to tumble causing injury and damage.
Note: Do not lift the complete generating set by the generator lifting points.Unpack the equipment with care in order to avoid scratching painted surfaces. Move the unit to the mounting location. The unit can be moved by either of the following methods:
Attach an overhead crane to the eyebolts that are installed on the generator frame.
Use a lift truck in order to lift the generator.The hoist and the hoist cables should have a rating greater than the weight of the generator.Note: The machine weight can be found on the rating plate, dimension drawing, and the packing list.
Illustration 1 g06167175
Lifting the generator
Illustration 2 g06167182
Lifting the generator
Ensure that the machine is lifted from its frame. Do not lift the machine from the top cover.Always keep the generator in the horizontal position during lifting. Keeping the generator horizontal will reduce the risk of the rotor falling out if a single-bearing design.Note: A machine mounted on a pallet should be lifted by crane from the lifting eyes of the machine.
Caterpillar parts catalog:
Parts piston Caterpillar catalog:
14H NA, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 235, 235B, 235C, 235D, 3126, 3304, 3304B, 3306, 3306B, 515, 518, 518C, 525, 527, 528, 528B, 530B, 571G, 572G, 611, 615, 615C, 621E, 627B, 627...
1673C, 1674, 235, 3304, 3306, 571G, 930, D7F, D7G
1673C, 16G, 3114, 3116, 3126, 3176, 3208, 3304, 3306, 3306B, 3306C, 3406, 3406B, 3406C, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3512, 3512B, 3512C, 3516C, 5130, 5230, 613C, 627B, 627E, 631D, 631E, 631...
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 1673C, 1...
3116, 3126, 3126B, 3126E, 3176, 3176B, 3176C, 3196, 3304, 3306, 3306B, 3306C, 3406B, 3406C, 3406E, 3456, 3516B, 651B, 776C, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 7...
3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3456, C-10, C-12, C-15, C-16, C-9, C11, C12, C13, C15, C18, C7, C9, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX...
1140, 1673, 1673B, 1676, 1693, 3208, 3306, 3406, 3512, 621, 631C, 641B, 768B, 769, 772, 773, 777, 980, 980B, D348, D6C, D9G
215B, 225, 227, 229, 571G, 572G, 955K, 955L, 963, 973, 977D, 977H, 977K, 977L, D6C, D6D, D6E, D6E SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2, FB221
572G, 977K, 977L, D6D, D6E, D6G, D6G2 LGP, D6G2 XL, D7G, D7G2
14E, 572G, 977K, 977L, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL, D7G, D7G2
572G, 983, 983B, D7F, D7G, D7G2
14E, 572G, D7G, D7G2
9N5410
PISTON GP
225, 3208, 613B, 953
225, 3208, 613B, 953
9N5408
PISTON GP
225, 3208, 613B, 953
225, 3208, 613B, 953
9N5409
PISTON GP
225, 3208, 613B
225, 3208, 613B
8F6956
PISTON
D364
D364
1H9956
PISTON
D364
D364
1H9576
PISTON ASSEM.
D342, D353C, D364, D379A, D398A
D342, D353C, D364, D379A, D398A
627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637, 637D, 637E, 637G, 7211
9G8981
PISTON
7211
7211
7N5499
PISTON GP
D379B, D398
D379B, D398
6T3470
PISTON AS
7261
7261