PISTON & ROD GP 9N6435 - Caterpillar

Illustration 17 g02584116
Disconnect clamp (28) .
Illustration 18 g02584176
Remove clips (29) and (30) .
Illustration 19 g02585116
Disconnect harness assemblies (31) .
Illustration 20 g02585336
Disconnect cable assemblies (32) from the electronic starter motor.
Illustration 21 g02585397
Disconnect hose assembly (33) from the steering pump.
Illustration 22 g02585403
Illustration 23 g02585578
Disconnect transmission oil fill tube assembly (34). Remove transmission oil fill tube assembly (34) .
Illustration 24 g02590380
Remove bolt (35) and the yoke.
Illustration 25 g02585840
Illustration 26 g02586181
Illustration 27 g02586197
Illustration 28 g02586257
Attach Tooling (A) and Tooling (B) to the transmission. Attach a suitable lifting device to Tooling (A) and Tooling (B). Attach a suitable lifting device to the engine at lift points (36). The weight of the engine and transmission is approximately 3389 kg (7472 lb).
Attach Tooling (C) and a suitable lifting device to the suitable lifting devices mentioned in Step 19. Apply suitable tension to the suitable lifting devices.
Illustration 29 g02586180
Remove bolts (38) and (37). Use two people in order to remove mount assembly (39). The weight of mount assembly (39) is approximately 25 kg (55 lb). Repeat for the opposite side.
Illustration 30 g02590258
Illustration 31 g02586257
Remove bolt (40). Repeat for the opposite Use Tooling (C) and the suitable lifting device in order to remove engine, torque converter, transmission and output transfer gears (41) .