PISTON 9W6216 - Caterpillar

Table 1
Product Link ECM Identification Chart    
ECM Name    Part Name    Description    
PL522     340-2413     Electronic Control Module    Note: Refer to Table 1 for the correct ECM that is installed on the machine, to gather the correct flash files.
Launch SIS Web and ensure that the new flash file part number is the latest flash file part number prior to service trip. A newer flash file part number may be available.Note: Additional information, including a list of Product Link flash files, is available on the "Service Technician Toolbox" web page found at "https://dealer.cat.com". Go to https://dealer.cat.com/pl -> Product Support -> Service Technician Toolbox.
Ensure that the PC drivers and CA3 firmware have been updated before using Communications Adapter 3 (CA3).Note: CA3 news, drivers, and firmware are available at "https://dealer.cat.com".
Use the latest version of Cat® Electronic Technician (Cat ET) for optimal machine software support. Use "WinFlash" to flash the new software onto the module.PL522 Product Link Improvements and Enhancements
The new Product Link software groups are listed below:
Table 2
New Product Link Software    
Component Name    Flash File Needed    Description    
Gateway     476-1900     Monitor Software Gp    
Radio     476-9318     Monitor Software Gp (1)    
( 1 ) This software is not available as a download from SIS. Submit a field support case to have the Radio software flashed over the air, after the Gateway software has been downloaded and installed.Gateway Software
Introduces support for Cat Fuel Consumption Monitoring Retrofit kits.
Enhance J1939 ECM information message by populating the "Name" field.
Introduces support for Product Link PL641 integration.
Tire Pressure Monitoring enhancements.
Improved reliability of PL522 onboard firmware flash process.Note: Not all enhancements or new features apply to all supported machine models.Radio Software
Improves the factory "End of Line Test" procedure for radio signal strength. Note: Is important that both the Radio and the Gateway software are flashed. Submit a field support case to have the Radio flashed over the air after the Gateway software has been downloaded and installed.