PLANETARY GP-TRANSMISSION 1635300 - Caterpillar

Illustration 1 g03437738
(3) Pump manifold assembly
Table 1
Specification for 7S-2983 Transmission Oil Pump Gp
Item Qty Part Specification Description
Note: Before operation, the pump must be lubricated with clean oil and the pump must turn freely by hand.
1 4 9S-1018 Washer Place the rubber coated washer between the bolt head and the steel washer in four places.
F - - Clearance between the pump gear (4) and the oil pump cover (5) is 0.094 to 0.137 mm (0.0037 to 0.0054 inch).
G 1 6I-9553 Pump Shaft Diameter is 31.742 0.005 mm (1.2497 0.0002 inch).
H 2 7M-9338 Bushing Bore after assembly is 31.786 0.008 mm (1.2514 0.0003 inch).
J 1 6I-9552 Pump Shaft Diameter is 31.742 0.005 mm (1.2497 0.0002 inch).
Illustration 2 g03437981
Table 2
Item Qty Part Specification Description
L 4 8M-8489 Dowel Protrusion of the dowels from the surface of the oil pump body assembly (2) is 6.0 0.5 mm (0.24 0.02 inch).
Illustration 3 g03438477
Section D-D
(6) Pump manifold
Table 3
Item Qty Part Specification Description
N 2 - Location of the bushing joint from the vertical center line is 30 15 degrees.
Illustration 4 g03438598
Section E-E
(7) Pump manifold
Table 4
Item Qty Part Specification Description
S 2 - Location of the bushing joint from the vertical center line is 30 15 degrees.
U 2 9M-0669 Dowel Protrusion of the dowels from the surface of the pump manifold (7) is 7.1 mm (0.28 inch).
V 2 5M-1995 Bushing Outside diameter before assembly is 35.065 0.013 mm (1.3805 0.0005 inch).
Installation depth is 1.57 mm (0.062 inch).