PLANETARY GP-TRANSMISSION 1774489 - Caterpillar

Illustration 2 g01049357
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove bolts (1) evenly until spring tension is released.
Remove retainer (2), spring disc (3), plate assemblies (4), discs (5), and friction discs (6) .Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     6V-3069     Clutch Alignment As     1    
B     -     Forcing Bolts1/2 - 13 NC by 3 inch     2    
C     9S-3263     Thread Lock Compound        
Illustration 3 g01049378
Remove bolts (7) and retainer (8) .
Illustration 4 g01049379
Remove bolts (9). Use Tooling (B) in order to remove cover (10) .
Illustration 5 g01049380
Remove bolts (13), spider (12), and deflector (11) .
Illustration 6 g01049717
Fasten Tooling (A) onto spider (12) .
Illustration 7 g01049357
Illustration 8 g01049426
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install friction discs (6), discs (5), plate assemblies (4), spring disc (3), and retainer (2) .
Use Tooling (A) and spider (12) to align friction discs (6) and discs (5) .
Apply Tooling (C) onto bolts (1). Install bolts (1). Tighten bolts (1) to a torque of 56 7 N m (41 5 lb ft).
Illustration 9 g01049380
Install deflector (11), spider (12), and bolts (13) .
Illustration 10 g01049379
Install cover (10) and bolts (9) .
Illustration 11 g01049378
Install retainer (8) and bolts (7) .End By: Install the drive shaft bearing cage. Refer to Disassembly and Assembly, "Bearing Cage (Drive Shaft) - Install".