PLANETARY GP-AUGER 3419466 - Caterpillar

Operation
The Premium Monitoring System displays machine operation information on the display module. The display module receives information from the Electronic Control Modules (ECM) on the machine via a CAN data link. Information about the machine is collected by ECMs via switches and sensors.
Illustration 1 g03794156
CAN data linkNote: If the signal to a gauge is lost during operation of the machine, the gauge will display the maximum value. The fuel gauge will display "Empty" upon loss of a signal.Power Up
The display module will initiate a powerup sequence when an input from the key start switch is received. The powerup sequence will include a functional test of the system.Power Down
The instrument cluster will begin the power down sequence when the key start switch is turned OFF and no engine speed is detected. In this mode, the indicators must draw power from the switch to the battery circuit that controls the activation of the indicators.The engine also sends a message to the display that tells the display to shut down.