PLANETARY KT 5633358 - Caterpillar

Installation Procedure
Illustration 1 g00699168
Install blower wheel (19).
Install retaining clip (18).
Illustration 2 g00699166
Install seal (17) on the blower motor.
Illustration 3 g00699163Note: Make sure that blower motor (16) is properly aligned in the housing.
Install blower motor (16) in the housing.
Illustration 4 g00699149
Install support (15) on the blower motor and install bolts (14).
Illustration 5 g00699159
Install hose assembly (13) on the blower motor.
Illustration 6 g00699125
Install air duct (11) on the blower motor and install screws (12).
Illustration 7 g00699502
Install screw (10) in the support.
Illustration 8 g00699006
Position the blower motor housing in the cab in order to access the harness assembly.
Connect cable strap (9) to the blower motor housing.
Illustration 9 g00699002
Connect harness assembly (8) to the blower motor.
Illustration 10 g00698974
Illustration 11 g00698986Note: Make sure that the outlet of the housing is correctly installed in the heating and air conditioning unit.
Carefully lift the blower motor housing. Install the blower motor housing.
Install bolts (6) that secure blower motor housing (7) to the platform.
Illustration 12 g00698971
Install the brackets and screws (4).
Illustration 13 g00698972
Install screws (5) in the air duct.
Illustration 14 g00698960
Connect harness assembly (3) to the damper motor.
Illustration 15 g00698935
Connect harness assembly (2) to the relays.
Connect harness assembly (1) to the cab air temperature sensor. End By:
Install the storage box in the cab. Refer to Disassembly and Assembly, "Storage Box and Covers (Cab) - Remove and Install".